Time Before my 8N

grhouse

Member
I thought I'd post a picture of the project I finished just before I bought my 8N and began this project. Of course, the Trike was for pleasure and the tractor is for both pleasure and for work on my little 6 acres. Due to unforeseen reasons, I've got the Trike on EBay now. Gene
a18890.jpg
 
(quoted from post at 17:21:24 07/16/10) How does the 3 point work, and how large of a bush hog can it handle?
robably needs a drag type, ground driven........probably very rare. :wink:
 
It started out as a 2006 Suzuki Burgman 650 Executive. That is considered a maxi-scooter. It is the largest scooter make with 638CC engine and a top-end of a little over 100 MPH. It will cruise at Interstate speeds all day without problem.
After it got where it was hard to hold up a bike because of my back, hips, and knees, I added the Trike Kit from The Trinity Trike company but it was one of the first 5 made and they were making them for the standard model and not for the Executive. It turns out there are little differences in the frames so I had to do some modification to their frame to get it to work on my bike.
I spend several months going back and forth with their engineer until we got all of the bugs worked out this Spring. There is not much I haven't touched on it. The paint is a cutom Candy Apple Red. I've upgraded the forks and shocks plus reworked the seat with a medical gel insert. In addition, I've added an electrical fuse block to control addition systems such as a stereo, heated seat, heated clothing, etc. I even swapped out all of the lighting on it for LEDs except for the headlight and I then upgraded the power on the headlights and installed modulators on both the headlights and taillights. Plus ...
Gene
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top