Tire Chains

I would like opinions on what type of tire chains I should look for, or any tips on them. I've never used a set, to be honest. I know that some types are known to fall between the lugs and not do much good. This is on a Deere MI with 11.2x24 tires, I've found it to be a pretty good snow machine!
cvphoto116978.jpg


cvphoto116984.jpg
 
I have used both type chains on my 430. I think the kind with the links between crossbars are superior to the ones with straight cross bars. Will also depend upon how much help you need. Anything works better than the bare tire. Ones with straight crossbars can be made from old truck chains
 
Too piggyback on hay farmer, on truck chains converted to tractor tire chains...i link two of the cross chains together with a quick link so they ride on the lugs. Works well.
 
There are yard chains and road chains, is what I was always told they were called. I like the yard chains better as they had the cross cross links for better winter traction. Just my experience. Kow Farmer
 
Highway chains work pretty well and a bit cheaper than the ones with the crossed center links . Even down in the lugs a bit they help a lot
cvphoto116988.jpg
 
Depends somewhat on how deep the tire lugs are.

On old, worn tires (shallow lugs) regular ladder type chains work fine.

However unworn tires with deep lugs almost require duo ladder or net type chains. Otherwise cross chains drop between the lugs and are rendered pretty much useless. Double ring chains also work but they are very rough riding - especially on ice/hard-packed snow.
 
(quoted from post at 22:45:25 02/06/22) I would like opinions on what type of tire chains I should look for, or any tips on them. I've never used a set, to be honest. I know that some types are known to fall between the lugs and not do much good. This is on a Deere MI with 11.2x24 tires, I've found it to be a pretty good snow machine!
<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto116978.jpg>

<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto116984.jpg>

Depends on what you are plowing. If you're plowing pavement then you want to limit the damage the chains do. So ladder type chains might be best. If you are doing more on gravel and dirt, nothing beats double ring chains.

Adding a bunch of weight to the rear helps in either case. 1-1.5K lbs isn't too much.
 
I have just cross chains made from double truck chains with the center chain removed. Even at 5 mph they move quite a bit. But I don't run them tight. Just have pickup chains on the front. .
 
I use double ring chains on my M with the same size tires that you referenced. I use this tractor to plow my driveway. I have also used "highway" chains, I would not waste my money on them.
 
Bob has your answer. Looks like you have pretty good tread I would go with cross link style a ladder style may drop into the tread. I have both types and they all work better then no chains. My 4020 actually would pull more with the ladder style on ice it would force the single chain into the ice but I prefer the cross link style. I would avoid the real aggressive chains they use on log skidders. I have an interesting set on my Massey 65, the links have 2 square knobs on the cross links.
 
The whole "fall between the lugs" thing is way overblown.

These guys that insist on fighting with their chains, have to be so tight you can play a tune on them, and the spaghetti nests of bungee cords, are shooting themselves in the foot.

Of course the chains are going to wedge down in between the lugs, you've given them no choice but to.

We've NEVER used bungee cords or chain tighteners. Just get the chains as tight as you can by hand and leave it at that. No jacking up the tractor. No deflating tires. No struggling. Throw them on and hook them up. If you're spending more than 10 minutes a side, you're taking too long.

The chains will naturally be a little loose, and if the chains are between the lugs, they will fall out from between the lugs just before they hit the ground, then the tractor tire drives on them.

If you don't care about the ground underneath, double ring chains are a good choice. Road chains aren't as effective but better than nothing and less harsh on paved surfaces. Studded logging chains are for if you really want to dethatch and aerate the ground, or get a little spring plowing in early.
 
I've made up several sets of chains out of old truck chains that were cheap for a small tires such as you have. Double ring chains are probably the best but I agree with barnyard that the fall between the lugs thing is a little over blown. It still make a big difference even if some of them do fall between the lugs.
 
I bought these chains for $50 thirty years ago, think they're a little wide and it's a rough ride but gets the job done.
cvphoto116999.jpg


cvphoto117000.jpg
 
I like Duo Grip type chains. I don't keep them really tight, but they stay on top of the lugs nicely and provide lots of traction.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top