TO 35 Cltch Part numbers Help!

[Don Freytag]

While changing my two stage clutch on my 55 TO 35 deluxe I noticed that on one of the 3 clutch relese arm/ levers that there was a small crack in the part where the pivoting adjustment screw head rides. I bought 3 new adjuster screws and ordered 3 new springs and when the parts came in I was missing 2 new springs (part #181125M1) so I started replacing the one I had. I took the old ones out and noticed the crack so I want to order the new release arms as well. I havent found a list of the part numbers for the clutch peices to order the parts I need. Can anyone help me out?

 

[Don Freytag]

CLUTCH PART NUMERS needed

 

[Jeff-oh]

Not sure I totally understand the part you are looking for, however, the part number for the "lever, clutch release" that goes with the "181 125 M1" spring and the "181 121 M1" lever adjusting bolt is "1 753 750 M1"

Jeff
Let me know if that is what your looking for.

 

[Don Freytag]

Ok so I went to pick up parts today. I got the other two springs Part number 181125M1 and as far as the levers on the clutch itself. These were part number 1753750M1 I only needed one but they were sent as a set of three and I had to buy all of em!. The pin that goes through the lever they didnt get. I cant seem to find that part number and I would like to buy three new ones. If anyone can give me that part number or know anyone that has three new ones I'd be interested. Since I have three new levers I will replace all of them and sell the other two good ones that were still on the clutch. If I cant find the pins I may just roll them over so the other side gets the wear. Anyone else do this? Thanks folks for any replies!

 

[Don Freytag]

You were correct on the spring, lever, and adjuster screws as the part numbers were correct.
Do you by chance have the number on that pin that goes through the lever? Then I think I'm done with my numbers search for now! Thanks so much for your reply!