TO-35

[brumbl]

I have a TO-35 with a Z134 Contenintal gas engine. I have to swap crankcase pulleys so I can mount a hydraulic loader pump. Is the crank bolt right or left hand thread?
Thanks

 

[miner09]

Should be right hand.

 

[brumbl]

Thank you.

 

[Steve@Advance]

It's right thread.

The original bolt is a holdover from the hand crank days, and is a very low grade, maybe cast.

When you go back with the new drive, you may want to find a better quality bolt, like a grade 5 or 8.

 

[brumbl]

Thank you much for the information. Will definitely upgrade the bolt.
Thanks again

 

[Jim L WA]

brumbl, where did you find the pulley you want to put on? I have a TO-20 with a F.E.L. and a pump driven off of a two groove pulley and was told that they can fail and are hard to find.

 

[brumbl]

Anderson Tractor Supply.

 

[K.Campbell]

(quoted from post at 09:57:50 08/14/22) Anderson Tractor Supply.

Near Bluffton Ohio?if I go there regularly..those guys have so much stuff and are really helpful.