Today's funny

jon f mn

Well-known Member
.
cvphoto63364.jpg
 
Of course that bolt will be on a component that requires everything to be disassembled.......again

Oh well, I needed the practice......
 
When I was a kid, my Grandad liked to tell a story about one of the neighbors. Foxy bought a new Farmall F 12. He thought he was quite the mechanic, so he took the tractor completely apart and put it all back together to show that he could do it. When finished he had one part leftover and couldn't figure out what it was until he tried to move it. It was the shifting fork. And then he would laugh!!!
 
I remember high school shop class, once we graduated from the class room to the real work, the "instructor" made the statement "Don't worry, there will always be some bolts left over!"

It took me by surprise that he would say that. I told him I would make a bet with him that it won't happen!

Then when I was finishing up a job, he tried to sneak some extra bolts in. I figured out what he had done, told him he should at least just put one in to make it more realistic!
 
When I was "in the business" that was one of my favorite tricks on new guys. When they weren't looking add a couple of bolts to the pile they had for a job.
 
When I was working, a friend had just finished repairing an automatic transmission and had gone out for a test drive, I slipped a needle bearing onto his empty workbench and waited. He came back and as soon as he saw that bearing, I decided to 'fess up, but not soon enough. He didn't speak to me for a week.
 
There’s something terribly wrong: I replaced the wheel bearing/hub assembly on my 2013 Chevy yesterday and Didn’t have ANY parts,bolts,or screws left over! I just don’t know what to do.Lol
 
(quoted from post at 09:03:12 11/18/20) When I was working, a friend had just finished repairing an automatic transmission and had gone out for a test drive, I slipped a needle bearing onto his empty workbench and waited. He came back and as soon as he saw that bearing, I decided to 'fess up, but not soon enough. He didn't speak to me for a week.
ou got off light!
 
That hit home.

When I worked in an Avionics shop in the Marine Corps, another fellow in the shop was overhauling the gearbox on a radar antenna from a jet fighter plane. It was rather complex, with about a dozen small gears.

He had all of the gear laid out in order for reassembly, and went on a coffee break. Me being a smart alec, I added a gear into his row of gears.

He worked for an hour before he figured it out, and by then I wasn't about to own up to it. He was seriously ready to punch someone out. He never did find out it was me.
 
Had two bolts left over after putting a engine in dad's truck. Took me a long time to remember they held the shield on between the engine and trans. I bet they're still in the glove box.
Grandpa was a mechanic. When I rebuilt my first engine he slipped some extra bolts in the pan. Fortunately I was a little sharper then a d knew they didnt go to it.
 
Adding to Bob's comment, a friend of mine rebuilt and had running, his first 855 Cummins engine at the IH dealership. While he was outside under the cab looking it over, a co-worker left a brand new main bearing bolt locking tab on the bench that Bruce found when cleaning the up the bench!! Derrick said Bruce washed out a sawed off 55 gallon oil drain pan and was under it getting ready to take the drain plug out when he stopped him!! Those guys in that shop in the '70's/'80's were vicious when it came to some of the pranks they pulled. Got so bad management came down on them and banned it.
 
Yup, like when I just finished buttoning up a dirt bike motor and there were two wrist pin clips on the bench. Are those the old ones I didn't throw away yet, or are those the new ones and I forgot to put them in???????????????????????????? RATS!!!!
 
When I was a kid, I paid $30 for a wore out Cushman scooter (which I dearly loved). I rebuilt the engine a had a pint fruit jar full of "stuff" left over when I finished. I rode the wheels off that thing.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top