top cover draft control

[hdltch]

Hi The draft control connecting link appears to be a little lose on my 8n top cover. You can shake it around under the top cover is there any way to tighten that up, So that the rod under their want drag against the cylinder. Thanks

 

[Tim PloughNman Daley]

You have some major issues going on. I suggest you pull the top cover and inspect further, no other way to determine the root cause. I wrote an article on how to do the 8N hydraulic system when you are on a budget -contact me if you want it -my email is open.

[i:654c4848f0][b:654c4848f0]<font size="4">Tim *PloughNman* Daley(MI)</font>[/b:654c4848f0][/i:654c4848f0]<table width="100" border="1" cellpadding="0" cellspacing="0" bordercolor="#000000"><tr><td height="25" colspan="2" bgcolor="#CC0000">

<font color="#FFFFFF" size="3">*9N653I* & *8NI55I3*</font>​

</td></tr><tr><td>

</td><td>

</td></tr></table>