Towner 7-24

[TGT 51]

I have a 7-24 Disc plow looking for a picture of the hydralic set up ,My plow hasn't got the resovor part it has been removed ,Wondering if there is a picture to go about replacing it

 

[used red MN]

Hello TGT, welcome to YT! No offense, but I have a feeling that you may not be to familiar with implement nomenclature. I believe the “hydraulic reservoir” your looking for is actually called a “hydraulic cylinder” If it is a wheeled machine the cylinder would probably raise or lower the main frame to either engage in the earth or raise for transport. It could also be for adjusting the angles of the disk gangs. I could not find a photo of the 7-24 model online so I might be way off base. A popular common sized implement cylinder in the 60s and 70s was an 8” stroke with either a 3 1/2” or 4” bore. Usually connected to the operating mechanism of the implement with 1” diameter pins 3-4” long. Any of this sound like it might be what you are looking for? Here is a link to an example 3.5 bore x 8” stroke universal implement cylinder. Example hydraulic cylinder
Not saying that is the best buy on one just an example that came up in a search.

 

[TGT 51]

 

[TGT 51]

Thanks for the comments, The Disc plow is 3 point linkage was made in conjunction with ferguson for the te20 and 35 tractors