Tractor discussion

Hooked180

Member
My 180 Massey has a new oil gauge that don't work. It shows empty. What do I need to do to know if it is the gauge or the float mechanism?
 
You can check the fuel tank sending unit by checking the ohms resistance on the sending unit in the tank then see if the readings match the specs in the service manual
 
Gauge is tested by GROUNDING the sending unit wire with engine running, so oil pressure switch will put 12V to the gauge terminal. Gauge SHOUD read full with sending wire grounded. Most trouble is the sending unit in the tank, either the float or rheostat is bad..
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top