Tractor Hours in a Year

Briar Hill Brittanys

Well-known Member
Location
Near Jasper, MO
Just wondering how many hours a tractor acquires in the course of a year, I typically run up 200-300, this year 287. Mostly mowing, square baling a few acres, firewood collecting, etc. It's a JD 5045, the only horse in the stable.
 
Last edited:
In Feb '93 I purchased from local JD dealer a used '91 JD 4255 that had 2847 hours showing on speed/hour meter in about 1.5 yrs of use. That tractor now has 2,000 hrs with 10,000 hrs of use hidden by numbers rolling past 00000.0 for a total of 12,000 hrs The hours that I put on it was while custom farming/baling hay. It hasn't been used much in the last 4 or 5 yrs due to my retirement.
 
Last edited:
1969, bought a IH806 with 1500 hours and sold in 1998 with over 13000 hours. The last few years I had it, it pretty much was used for auger work. Engine was never opened up for anything, only split once for a clutch and still had original TA. Had an offer for it I couldn’t refuse even though it was not for sale.
 
Just wondering how many hours a tractor acquires in the course of a year, I typically run up 200-300, this year 287. Mostly mowing, square baling a few acres, firewood collecting, etc. It's a JD 5045, the only horse in the stable.
Hours per year might vary with the type of hour meter used on the machine.

I suspect electric hour meters tend to record higher hours than mechanical hour meters because most electric hour meters simply record the number of hours the engine is running regardless of the engine speed while mechanical hour meters are geared to record hours run at rated RPM. Depending on how the machine is used a mechanical meter could record 10 percent lower for a tillage tractor or a combine that mostly runs at full RPM while a mechanical meter might record 30 to 50 percent lower for a yard tractor might that rarely gets up to full RPM.

Maybe some of the newer electric hour meters already compensate for this?
 
Put one on a grinder-mixer on a dairy farm grinding and mixing feed for 250 cows, 7 days a week and you might be surprised. one of my customers has at least 10 tractors and more than one has over 10,000 hours.
 
It depends on how much snow we get each year. In bad winters I might put a couple hours or more per day. The past few years I don't think I've put on 20 hours between 4 tractors and a skidsteer.
 
1969, bought a IH806 with 1500 hours and sold in 1998 with over 13000 hours. The last few years I had it, it pretty much was used for auger work. Engine was never opened up for anything, only split once for a clutch and still had original TA. Had an offer for it I couldn’t refuse even though it was not for sale.
I boought a one owner 806 off a farmer i meet at a sale that was a low hour one with only 4700 hours . It was a 66 year model and i fixed it up to as near new cond. as one could and planned on keeping it . My buddy laid a paint job on it that out did his best work . It made the cover of fast line . I had no intention of selling . Then some guy showed up and asked i kept telling him it was not for sale and he could go find one at most sales for 45-6500 . He just kept bugging me while i was tryen to finish up a customers tractor . So i figured that is i throw a way out price on it he would just go away , so i said 8750 and he goes Oh and turns and walks out the door . 20-30 min. later he comes in with his wife a and said how do you want the check made out . I came back with cash only no checks no credit cards CASH . He sends his wife to the bank and she comes back with cash. I was once again looking for and 806 as they were getting hard to find . I ended up buying one off and auctioneer friend over east a real rag with org faded paint nasty chain marks on the fuel tank sheet metal from when the picked this tractor up after it was broken in half from a tangle with a semi . oil leaks everywhere red dirt packed in every nook and granny and it was a narrow ft and a early model that someone changed the remote levers on and a fast hitch , and new rear tires . It came from the south from some sale Ed had worked and he lived in Bunkerhill W. Va . It was UGLY then and worse now . Could it be fixed up to look new , Yep but we ain't ah going to do it . It runs like a scalded dog and it has become the go to tractor for just about everybody in the neighbor hood as ya never know where it is . Of all the I H 06 and up series that i have bought and sold this old RAG has the best steering of all and steers like a Deere . Why and how come i have no idea . If and when needed ya can back up to the 5x16 720 plow and go to plowing in sod your in third low T/A in the high side in corn ground you can run forth low high side . Ya can drag the 18 foot disc once ya put the duals on . . the only job it fails at is round baling due to the fast hitch bundle dragging wind rows . the best part is NOBODY has bugged me to buy it .
 
Probably about 100 hours per year average for each tractor. There's probably 20 tractors around here, - everything from an old 60 to a 5520 and three 450B forklifts. In high season most everything has an implement attached so it saves a lot of time hooking stuff up.
 
100-300 hrs. per year per tractor pending the tractor across 7 tractors. The only one that isn't racking up hours is the 1586. During the winter they all rest for the most part. 4040/4430/2350/2355/2950/TD95D/1586

2950 is my uncles and no hour meter and had another one of his tractors here that lightened the work load on my tractors this summer.
 
Hours per year might vary with the type of hour meter used on the machine.

I suspect electric hour meters tend to record higher hours than mechanical hour meters because most electric hour meters simply record the number of hours the engine is running regardless of the engine speed while mechanical hour meters are geared to record hours run at rated RPM. Depending on how the machine is used a mechanical meter could record 10 percent lower for a tillage tractor or a combine that mostly runs at full RPM while a mechanical meter might record 30 to 50 percent lower for a yard tractor might that rarely gets up to full RPM.

Maybe some of the newer electric hour meters already compensate for this?
That brings up a very good point. As for me I’d rather see the actual engine running hours. Not necessarily hours under load. Idling hours in my mind is worse than working hours. Then again half throttle work is less wear than running say at pto speed at 2400 rpm or such. Or is the wear not much different if the engine isn’t working as hard to maintain pto speed as compared to one working at pto speed with the governor maxed out ? So many variables !
 
Put about 80 hours a year on my '51 Ford 8N mowing and hauling wood. Just moved from TN to a cold Ohio pole barn, so snow plowing might bump those hours up this winter if my 6V starter behaves!
 
When we were running the sweet potatoes, we put around 225 hrs on the main tillage tractor, 125 on the row maker/digger tractor and 125 on the plant sitter/general use tractor. Then around 100 hours each on the 3 cultivator tractors. After quitting them the hours were few and far between. Just sold my cx90 I bought new in March of 1999 several years after quitting the full time farming. It had 2145 hours when it left last week.
 
For comparison purposes; the little Cummiins diesel engines powering generators in motorhomes typically accrue >8,000 hrs before requiring an overhaul, providing the maintenance schedule was followed.
As for my utility tractor today, 150hs/yr it all it takes to maintain my farm since retirement.
 
Just wondering how many hours a tractor acquires in the course of a year, I typically run up 200-300, this year 287. Mostly mowing, square baling a few acres, firewood collecting, etc. It's a JD 5045, the only horse in the stable.
Sounds like that’s about perfect since the oil change intervals are 250

Usually we put about 200 on the 3 that work however we lost the 4wd this year with a head gasket failure so the 8270r will have about 500 for the year with an extra oil change once the anhydrous is done tomorrow night
 
That brings up a very good point. As for me I’d rather see the actual engine running hours. Not necessarily hours under load. Idling hours in my mind is worse than working hours. Then again half throttle work is less wear than running say at pto speed at 2400 rpm or such. Or is the wear not much different if the engine isn’t working as hard to maintain pto speed as compared to one working at pto speed with the governor maxed out ? So many variables !
When electric tach's started replacing mechanical ones hours about doubled. I remember being sent out with a new tach for a new tractor under warranty. After I replaced it I ran into the owner returning from cultivating with his JD 520. I asked what the problem was. He said it was counting up hours about double what his other tractors did! He pointed to the tach on his 520. He also had an Oliver 1850. The new tractor was an AC 6060. So he had a little bit of everything. After I explained what was going on, he was concerned that leaving the key on would rack up hours. So I explained that to him also. Alternator has to be turning for the hour meter to count up hours. At that point I offered to go back and put his original tach in. But he declined.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top