Tractor tires

super99

Well-known Member
I went to Monroe, Wis. today for 1550 parts and stopped at Moore Tires in Rock Falls, Ill. on the way home and priced a set of tires for the 1550. 15.5x38 8 ply Petlas tires were $481 each. Firestone's were $608 each. Tubes were $75.15 each. 6.00x16 tri rib fronts were Speedway 8 plys at $77.50 each and tubes were $16.35. I'm not ready for tires yet, but I'm thinking I better get them while I can instead of waiting and maybe can't get them when I'm ready for them. Any thoughts on Petlas tires?? The guy said they sell a lot of them for antique tractors. I need to check with the Firestone store in Muscatine tomorrow, I stopped in a month or so ago and they had BKT 15.5x38 tires for $450 each, don't know if the prices has gone up or not. Any thoughts????
 
I just paid $515 each for Firestone 12.4 x 38 4 ply.60some dollars for tubes.A Titan of the same size/ply was 650 each.Tire shop says that is a hard size to find.
 
Priced some 18.4-38 Firestone Super All bias 8 ply for 750 each. Like the looks of them just don't know how good they will be.
 
Have I got a bargain for you
cvphoto84939.jpg


cvphoto84940.jpg
 
(quoted from post at 22:47:40 04/13/21) Have I got a bargain for you
<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto84939.jpg>

<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto84940.jpg>

Well SV. Looks like you could use a lesson or two from Delta on how to get them rows straight or else lay off the sauce. lol
 
LOL, they look like they have served you very well. I got one set that my local dealer sold over over 54 years ago, i have had them for over 40, and there still good,just minor cracks, but they have been inside, when not in use!
 
Have you called Harry's Farm Tire in Wheatland? It would save you the cost of a tire truck visit if you could get the tractor and tires TO the truck.
I've been shopping for rear tires for my Farmall M for 2 years. Local Firestone store had a great price on 15.5x38 Firestone Super All Traction 2 tires, seems like was around $549/ea. They bought lots and they haven't sold that well. They priced 13.6x38 and 14.9x38 at more than the 15.5's, but my M has 13.6x38, 12 inch rims, was going to cost over $500 to get DW-14x38 rims.
I've pretty much decided to get MITAS tires, they make so many different tread designs, I want a straight 45 degree lug, no bulges, no bends, they're made in CHARLES CITY, IOWA. I know GOODYEAR is now TITAN made at the old Kelly-Springfield Plant on Rt 20 east edge of Freeport, Illinois, and I have lots of friends, old co-workers in Freeport, but I really don't care for the looks or price of any GY or Titan tire. Every tire store I've talked to pushes the BKT. They're made in INDIA. DAD spent THREE terrible years in India in WW-2, I won't insult Dad by putting Indian made tires on His old M.
 
I never heard of that Petlas either. I've got BKTs on a few here. My 1365 has them. One of them on my 1550 is a BKT too. I have several three rib front BKTs. I don't remember what brand those 11.2 38 are that I put on one of my 66s last summer, I'd have to go out and look, but I do remember that the pair of them cost me $750 cash and carry. I think they were Titan, but wouldn't swear by it. Wherever it was, it was the only place they could find 11.2s except for irrigation tires.
 
I bought a set of Petlas 16.9x38 bias tires for my IH 686 about two and a half years ago.Have around five hundred hours on them.Showing very little wear.They have good traction and ride good on the road.This tractor is used year round.Loader work as well as field work.
Paul
cvphoto84996.jpg
 
Ya want wider rims then ya make them wider . I need a band made i run down to a small town S.W. of me and tell them i need a band X inches wide for a 38 inch rim and pick them up the next day. Always add about 1/4 inch to the width ya want to make up for the torch cut and grinding . Take a center punch to the rim and mark both sides of the cut , that way when ya line the punch marks back up your fit up is a lot easier if your cut got off . I split the rims on my S/MTA and put a 4 inch band in them for a 16 wide rim and mounted 16.9x38 Stones on it . back then the bands were 35 bucks . Ran a hot low feed pass on the inside for a flatter bead and no grinding and a med heat with a medium build up on the out side
 
Just replaced a tire last week 20.8-38 bias on my White 2-105. Local tire shop quoted $850 for Alliance 347. Bill was just under $1100 with good tube and switching fluid. Alliance 347 is a 23 degree clone. Bought that brand to match tire on other side.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top