trailer fenders

Doug-Iowa

Member
My son and I are working on the tractor hauling trailer fixing the tongue tilt pivot that is froze up. Should have been a quick fix. I noticed some bubbles under the anti skid material on the fender, so I poked at it with my pocket knife. Well that was a bad deal to start, the entire fender is rotted from underneath. Its only a 2018 but the powder coat was terrible. So new fenders are needed, and that means cutting everything off and starting over. I wonder if its a good idea making them removable?
cvphoto126966.jpg
 
(quoted from post at 18:36:41 05/29/22)..... So new fenders are needed, and that means cutting everything off and starting over. I wonder if its a good idea making them removable
When the factory fenders on my trailer rotted out, I couldn't bring myself to use cheap replacement fenders. I had actually bought a pair, then said no way. I returned them and bought some 10 inch junior c-channel from the local scrap yard and made my own. 12 years later and still as good as the day I made them.


mvphoto92646.jpg
 
That stinks on something not that old ! We have a PJ gooseneck thats from early 2000s and the powder coat is peeling here and there. Never sees the winter. We take stuff at work to a place locally that specializes in powder coating. They say one of the biggest things is metal prep before the coating. They sandblast and clean new steel before coating. I agree with them. Have you ever taken a new piece of steel and ground it a little with a flap wheel ? There is definetly a thin coating on it. Powder coat shop says thats why a lot of power coat fails. Bad prep ! Still not something nice to find !
 
(quoted from post at 16:22:17 05/29/22) That stinks on something not that old ! We have a PJ gooseneck thats from early 2000s and the powder coat is peeling here and there. Never sees the winter. We take stuff at work to a place locally that specializes in powder coating. They say one of the biggest things is metal prep before the coating. They sandblast and clean new steel before coating. I agree with them. Have you ever taken a new piece of steel and ground it a little with a flap wheel ? There is definetly a thin coating on it. Powder coat shop says thats why a lot of power coat fails. Bad prep ! Still not something nice to find !


The problem with powder coat on trailers is not the prep it is that there is no prep. Powder coating shops always blast all the old coating and rust off. Almost all of their work is used parts. Trailer manufacturers use powder coat only because it gets them off the hook for VOC regs. I wouldn't buy another powder coated trailer.

This post was edited by showcrop on 05/29/2022 at 05:20 pm.
 
I have replaced fenders permanently and will continue that practice. Ive noticed that a privately owned trailers that get washed regularly last much longer. The trailers that are use by construction companies usually dont get washed as often or as through. And the employees are more interested in getting home on Friday after work than worrying about rusting the trailer and equipment driving on salted roads. My guess is the next set of fenders will last as long as the trailer.
 
My last trailer rotted through the fenders in about five years too and I had to replace them. I now have a PJ that's powder coated the I brought 6 years ago. It lives outside and I've been happy with the way its held up although it has aluminum fenders on it. I do baby it and its only seen salt once or twice and I wash it off right away. Maybe a set of aluminum fenders would hold up better for you.
 
Can a Galvanized trailer be bought now? I saw some Detach trailers at places I used to load that were galvanized. The whole trailer was galvanized from the front glad hands and light plug to the tail lights.
 
Have a set bent up from 1/4 inch tread plate,with a little bracing you can then drive over them with a wide tractor.
 
Could you place a piece of diamond plate on the top, after a good paint job on the top and bottom? Out here on the west coast I don't have a problem with rust, it's operator error. When I load my tractor, and mower if I am not careful, and too far forward the mower comes down on one fender. I just beat it back out until the next time. Then some times the front lower fender tip is bent back turning too close to solid objects. Around 75 loads, and 75 unloads each year x 30 years, the fenders still have their shape. I thought about making stronger fenders (sometime), like everything else. Stan
 
I had removable fenders added as an option when I bought my trailer, dad thought I was nuts, but was the best thing I ever did. A few times now I have removed them in order to get something loaded on the trailer that wouldn't been possible if they were hard mounted.
 
Commercially built trailers are made from garbage materials. They use the cheapest lowest-grade steel they can get their hands on.

Those fenders could have been polished shiny under the powder coat and they would still rot away.

The steel I get from the steel yard doesn't need paint. It gets a layer of surface rust on it and that's it. I've got things I've made from this good steel that have sat outside for 10+ years, never been painted.

On the other hand a commercially-built trailer <10 years old is literally melting away from rust.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top