Trojan wheel loader model 164

[TiredIron#3]

Need help power steering pump not working looking for replacement also cannot figure out how to reach oil drain plug size? New to me loader

 

[sandcastle1]

For the power steering pump some forklift shops might be able to help you with parts.

 

[used red MN]

also cannot figure out how to reach oil drain plug size? New to me loader

Hello TireIron.., welcome to YT! No idea of the configuration of the machine you are working on. A picture of it would be extremely helpful!! Here is a possible idea, duct tape a large enough socket onto a long extension. Place a sufficient amount of modeling clay in it and sprinkle talcum or baby powder on the exposed surface of the clay. Shove the socket over the plug to make an impression to measure. If the plug is oily the powder can probably be skipped.

 

[TiredIron#3]

Hello TireIron.., welcome to YT! No idea of the configuration of the machine you are working on. A picture of it would be extremely helpful!! Here is a possible idea, duct tape a large enough socket onto a long extension. Place a sufficient amount of modeling clay in it and sprinkle talcum or baby powder on the exposed surface of the clay. Shove the socket over the plug to make an impression to measure. If the plug is oily the powder can probably be skipped.

Thanks guys I’ll try to get some pictures