Tuesday Truck Pic

kcm.MN

Well-known Member
Location
NW Minnesota
1948 Ford F6 grain truck
Puzzle: https://jigex.com/7b92

mvphoto73880.jpg
 
Good looking old Ford!! Just about every truck up to the late 60's early 70's had the box pretty well centered over the rear axle. After that the frames were longer and the wheels were farther back to spread the weight better. Neighbor had a early 50's Chevy with a 14' combination grain and livestock box on it. They were combining corn and the truck was parked facing uphill with a big load of corn on it. He and the hired hand were standing there talking and looking at the truck. The haired hand said that it looks like it wouldn't take much for the front end to come off of the ground, walked over to it , lifted on the front bumper as hard as he could and the truck tipped back and the rear of the box sat on the ground. Then they had to go get a wagon and shovel enough corn >off of the back of the truck to get it to set back down. He said it did steer easy when loaded. That is the story that they told anyhow.
 
I have a similar story. My grandpa, two of his brothers and my uncle all squeezed into the cab of one of those trucks. My uncle being the youngest and smallest was sitting sideways working the steering wheel. Someone else was working the pedals and I think a third was shifting. They were hauling as many cattle as they could fit when they came to a steep hill. As they started up all the cattle stepped towards the back. The front end came up and the rear end landed on the road. It was still moving so they kept going up the hill. My uncle said when it leveled out and the cattle moved some the front end slowly dropped back down and they continued on their way. As you said that's the story that was told to me and it was before I was born. Only my uncle is still around and he swears it was true.
 
When I was growing up our next door dairy farmer had a '48 Ford F6. When he drove by it was never faster
than about 30 mph. Thinking now, I don't remember if the button on the side of the floor shift was an
overdrive or a 2 speed rear axle. Someone here know? I don't think he ever used it.
I grew older and and hired out to drive his Farmall H or Oliver 70 during hay and straw season. I then
got to drive his '48 Ford.
The one problem that I had was his chewing tobacco. Both tractors fenders and the driverside truck door
had spittle stains. Convinced me to not chew.
 
Two speed rear axle, as I recall. Dad had 1948 F-7 and I hauled many loads of wheat to Robin Hood flower mill and cotton seed to oil mill. As it got old, he transplanted the International Blackdiamond inline six into the place of the tired old flathead.
 
(quoted from post at 20:28:58 04/21/21) Two speed rear axle, as I recall. Dad had 1948 F-7 and I hauled many loads of wheat to Robin Hood flower mill and cotton seed to oil mill. As it got old, he transplanted the International Blackdiamond inline six into the place of the tired old flathead.
dditional , 'funny', he had a spring company fab really stiff springs such that the 'over-load' springs wouldn't touch the pad even with severe overload. Highway boys would look and decide to not even get their scales out.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top