Tuesday Truck Pic

kcm.MN

Well-known Member
Location
NW Minnesota
Puzzle: https://jigex.com/m4rsT

mvphoto94057.jpg
 
Round blade mill would do it with a 7 foot blade. Take a slab off one side then turn it take another off turn and do the 3rd side then start sawing off the lumber then run through an edger to get the width you want. Or stack them to the side for a second run to make the widht you want that way.
 
in 1970 i started working in a sawmill in western washington. at that time we could cut a 9 ft dia log, 40 ft long. the
carriage was steam powered. in the late 70s' the mill was remodeled. quit making steam, and the head rig side of the sawmill
was reduced to 8ft logs and only 20 ft long. i will never forget the smell of a old growth log being sawn on a warm summer
night.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top