Unknown Front end Loader

molinegb

Well-known Member
Anyone recognize loader? Has single cylinder on bucket. Bucket is black in color. No frame goes under rear axles like most. Loader frame basically bolts to a pedestal. Case?
mvphoto76733.jpg


mvphoto76734.jpg
 

The single cylinder bucket tilt in the picture looks similar to the Dunham Lehr that I have. You can giggle it and look at various images.
 
Design similar. Has a pedestal that goes under belly crossways and loader frame bolts to pedestal. Also has 3 holes in top frame for cylinder pins. Was there any serial tags or decals?
 
Pics are too blurry to tell for sure, but it could be a case. If so
it would be a 60s vintage
 
Looks more like a Minnie MO for a tractor. As for the loader I would weld on a couple pieces to reach the rear axle for strength and support of the bell housing area.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top