Unknown make scythe hay cutter

[Legamin]

Ive got a green colored PTO scythe cutter with the numbers MT7G and MTB269 on it. I would love to add pictures but cant figure that bit of tech out. I get them loaded to the gallery but they dont come in with the upload? Go figure.
The scythe cutters are 3 by 3-1/4 and the entire cutter is 6 with a total of 24 teeth. I think it has always run off of PTO but a 3 point mount was angle ironed onto it some time back so I dont know the original mountpossibly drag arrangement of some kind. It works like a champ but Id sure like to learn more about it.

 

[Jim.ME]

This is going to need pictures.

How large are your pictures, the forums have a 7 MB size limit, and some phones and cameras take pictures larger than that and you need to reduce them to post. One possibility as to why you can't post them.

 

[Legamin]

(quoted from post at 03:07:20 06/21/22)
This is going to need pictures.

How large are your pictures, the forums have a 7 MB size limit, and some phones and cameras take pictures larger than that and you need to reduce them to post. One possibility as to why you can't post them.

That could be the issue. Im pretty dumb about that stufffortunately my granddaughter is visitingwill get back to you!

 

[Legamin]

Here are the pictures



This post was edited by Legamin on 06/22/2022 at 05:01 am.