vac plow

[handcrank]

I have a 1950 vac with the eagle hitch. I also have a two bottom plow that was given to me.I was told that it was made for my vac.No way will it fit my eagle hitch.Plow is in good cond,still has some green paint on it,tail wheel seems good also.I have no use for it and was wondering what it is called and what it,s worth. Thanks for any info.

 

[George1048]

Without seeing a picture, it is difficult to identify your plow. I am guessing it is probably a VCMB plow meant for the pre- eagle hitch VAC's. They used a high pressure hydraulic system with the pump driven by the belt pulley shaft, and a single acting cylinder mounted on the left side of the torque tube and transmission housings. The plow was raised through a series of rods and bellcranks under the floorboards, with tilt and depth set by hand levers on either side of the driver's seat. Post a picture if you can, and we can tell for sure.