Valspar paint

wi

New User
I have a few questions concerning Valspar Restoration paint, with hardener. Have any of you tried the paint(in gallon,sprayable)for tractors. I was also wondering if I could use a auto Omni epoxy primer first befor I spray the (Valspar)color. It would seem to me to be better for adhesion to the bare tin on the tractor than their (Valspar) primer,and have to wait 2-3 hrs to spray their color. I called the Valspar company to ask if I could clear coat with auto clear and was advised against it for their reason it might lift the paint. Any answers are appreciated.
 
100% Valspar enamel. No hardener. First coat was fairly heavy, second was thinner. I painted this one with the touch up gun on the second coat.
a124598.jpg

a124638.jpg
 
This is a classic type question for the engineers at Valspar. Send a note to Shawn Mahady (if he is still there), email is [email protected]

Shawn has helped me more than once when I got myself in a bind. (PatB)
 
I have used the Valspar OEM equipment paints over epoxy primer for the reasons you intend. You can clear coat BUT YOU BETTER TEST APPLY ON SOMETHING THAT DOES NOT MATTER FIRST!!!!! Not just any clear is compatable with the enamel.
 
I just finished painting a 2000 ford with valspar restoration series. The blue seemingly was closer to original than the CNH dealer wanted to sell me. I used the hardener as the finish became very glossy and dried very quickly. The light gray ford color from valspar spray can matched the can from CNH nicely. I have no complaints.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top