Voltage regulator

[Dingo3]

Any idea what this went to? Ford, I’m thinking but what years.

 

[Tony in SD]

Not sure it is restricted to any particular brand. They were used on a lot of different vehicles. Probably pre mid 1970s when electronic voltage regulation became popular.

 

[tech4]

Here is what EBay says about it.

12V N/P 7415 Voltage Regulator Tractor Combine Industrial Farm Equipment | eBay

Numbered 7415 12V, P/N (Positive or Negative Grnd). "Rubber" Mounted Mounting Brackets.

www.ebay.com

 

[JMOR]

That 4th terminal (Load) rules out any Ford tractor, I believe.

 

[wore out]

Any idea what this went to? Ford, I’m thinking but what years.
View attachment 114427View attachment 114428View attachment 114429

It appears to be a generic reproduction of a Delco-Remy two-unit regulator, they were commonly used on tractors and industrial equipment, not autos, going back to the late 40's, AFAIK.

https://www.google.com/url?sa=t&sou...0QFnoECEIQAQ&usg=AOvVaw2mQy74HrhCmNWH0JLUp7zF

 

[Dingo3]

Thanks everyone. @tech4, That’s it, I searched that part number and didn’t get any hits.

 

[560Dennis]

I would suggest looking at in photos conductive terminal 3db ,the corrosion will conduct to the other terminal . I would not advise using it ,advise it be tested , to avoid it doing damage to your electrical system . Just what I noticed.

 

[Janicholson]

Thanks everyone. @tech4, That’s it, I searched that part number and didn’t get any hits.

It is for an "A" circuit generator, not a "B" circuit as in many Ford tractors and Autos.. Probably IH 2 brush. The L terminal attaches to tractor load (lights and stereo!!!) Jim

 

[Dingo3]

I would suggest looking at in photos conductive terminal 3db ,the corrosion will conduct to the other terminal . I would not advise using it ,advise it be tested , to avoid it doing damage to your electrical system . Just what I noticed.

Good catch, I missed that.

 

[buickanddeere]

There are 100% solid state regulators to install on old conventional antique generators. no more contacts to oxide over or weld closed.

OEG Parts New Generator Regulator Compatible With 12 Volt Solid State Circut 10DN 20DN Delco Series Neg Ground 9L7309, 9L7648, 156960, 191818, 1119506, 1119512, 1119515, 1119519, D630, D635, D663​

Visit the Parts Player Store
4.3 4.3 out of 5 stars 72 ratings


$35.95$35.95

$13.86 Shipping & Import Charges to Canada Details

• Replacement Part Numbers: 1119512, 1119515, 1119519, 156960, 191818, 8273, 8-273, 967867R91, 9L7309, 9L7648, D630, D635, D663, 1119506
• Condition: New; Voltage: 12V; Mounting Hardware Included: No; Number of Pieces: 1; Country of Origin: CN; Notes: Transpo; Solid state circuit; OE appearance
• Brand New Voltage Regulator - Manufactured With New Premium Quality Components - Engineered To Meet Or Exceed OEM Specifications - Tested For Reliability, Durability And Performance

 

[Duner Wi]

The OEG above is for Delco 10DN and 20DN alternator. I have one on a 10DN alternator but mine was made by Wells if memory serves.

 

[NDIHC]

The rubber mounts are the same as on old cub cadets.

 

[Bob Bancroft]

Any idea what this went to? Ford, I’m thinking but what years.
View attachment 114427View attachment 114428View attachment 114429

Generic, universal, ubiquitous. When I worked at a farm equipment dealership in the 70's, these were kept in stock for a common replacement. (Seemed that all of our systems were Delco)

 

[Jim.ME]

The OEG above is for Delco 10DN and 20DN alternator. I have one on a 10DN alternator but mine was made by Wells if memory serves.

The voltage regulators for the 10DN and 20DN alternators I have dealt with used a 4-spade plug-in connector, not screw terminals. I am with the it is a regulator for a generator as has been posted, group.

 

[Jim.ME]

There are 100% solid state regulators to install on old conventional antique generators. no more contacts to oxide over or weld closed.

OEG Parts New Generator Regulator Compatible With 12 Volt Solid State Circut 10DN 20DN Delco Series Neg Ground 9L7309, 9L7648, 156960, 191818, 1119506, 1119512, 1119515, 1119519, D630, D635, D663​

Visit the Parts Player Store
4.3 4.3 out of 5 stars 72 ratings


$35.95$35.95

$13.86 Shipping & Import Charges to Canada Details

• Replacement Part Numbers: 1119512, 1119515, 1119519, 156960, 191818, 8273, 8-273, 967867R91, 9L7309, 9L7648, D630, D635, D663, 1119506
• Condition: New; Voltage: 12V; Mounting Hardware Included: No; Number of Pieces: 1; Country of Origin: CN; Notes: Transpo; Solid state circuit; OE appearance
• Brand New Voltage Regulator - Manufactured With New Premium Quality Components - Engineered To Meet Or Exceed OEM Specifications - Tested For Reliability, Durability And Performance

It appears OEG is using the original name Delco gave to their alternators. The Delco 10DN alternator was one of the Delcotron Generators in the early days. The part referenced here is a regulator for we now call a Delco 10DN alternator.

 

[Dingo3]

Thanks for all the info everyone. I don’t know where it came from and I was hoping I could use it as a spare on my Ford wagon that still uses a gen. as a spare. My tractor has an alt. so if anyone wants it contact me.

 

[JMOR]

Thanks for all the info everyone. I don’t know where it came from and I was hoping I could use it as a spare on my Ford wagon that still uses a gen. as a spare. My tractor has an alt. so if anyone wants it contact me.

what Ford wagon?

 

[Dingo3]

what Ford wagon?

61 ranch wagon

 

[Duner Wi]

61 ranch wagon

Is not correct for 223 six in 1961. Will it work, very doubtful in my mind. eBay seller says his is same as or interchangeable with Napa Echlin VR898.

 

[buickanddeere]

Nothing complicated . A type A or B generator . Armature output , field and connection to the ammeter/battery . No mystery .