W-4 throttle.

[Ohio-H]

Did the W-4 throttle lever have a knob or is it just the steel lever. Also is the bracket for the on/off switch the same as the one for the H??

 

[rustred]

No knobs on throttle to lever. I don’t think them brackets are the same without having a look at each one.

 

[used red MN]

Not familiar with the “standard” McCormick models but an original H has the switch in a hole in the cast arm off of the steering support tube that holds the belly pump control rod. The switch has a red knob in the photo right above the black voltage regulator. I guess I can’t speak for an H that didn’t come with a LiftAll pump.

Here is a W4 operators station, I am not sure where the ignition knob is unless it is in the box below the light switch hid by the steering wheel. This one shows a knob on the throttle but it could have been added by the owner.
Edit: Looking closer I think I see it under the throttle lever.

 

[rustred]

totally different brackets then.

 

[Tim in New York]

Did the W-4 throttle lever have a knob or is it just the steel lever. Also is the bracket for the on/off switch the same as the one for the H??

As the picture shows, the throttle can have a know. I put one on my W-4. Got it from Steiners, I think. And almost certain it is the same as the shifter knob.

 

[rustred]

Yes it is.