WD 45 belt pully

[Mike in Ohio]

Have any of you guys replaced the cork seal that seals the pully tube to the housing? I haven't pulled out the old one yet because it isn't leaking that bad.

It looks like a strip of cork gasket material laid in a trough in the housing. In theory I just need a piece of cork the right width and thickness to lay in the slot.

I can't find a ready made one anywhere online. Am I on the right track with this?

 

[funky_g00]

You should be able to order it thru an agco dealer, unless it has been discontinued in the pass 15 years since I replaced the seal on my WD. You are basically right in that it is a square ring of cork I want to say 1/4" thick but it may have been as large as 3/8".

 

[funky_g00]

I just did a quick search for it online and found this:

Belt Pulley Gasket Allis Chalmers WD WD45 WC WF 70202289
$22.50

The website is DJ's tractor parts.

HTH

 

[Mike in Ohio]

Thanks, I will check out that site.

 

[Bill in MA]

I got mine from DJS Tractor Parts.

 

[4wdtom]

If you have trouble finding one you could try Sandy Lake Implement, ask for Brenda, she knows ACs

 

[Mike in Ohio]

Thanks again guys, I ordered it from DJs. I will add Sandy Lake to my list too.