Weed Eater Blower

Have a Weed Eater Blower Model GBI 22v that has been a dandy. Have replaced the carb kit several times successfully. It quit on me so I tried that again. Now I cannot get gas into the cylinder, spark plu always dry. Maybe I need to raise the inlet lever a bit above the instructions.

Where can I get parts and a parts manual.

Thanks
 
Check and make sure the cylinder bolts have not came loose. If they do get loose it can suck the cylnder o-ring in, not seal and it cannot transfer fuel from crankcase to cylinder. we get a lot of those blowers in with that problem.
Jim
 
Check and make sure the cylinder bolts have not came loose. If they do get loose it can suck the cylnder o-ring in, not seal and it cannot transfer fuel from crankcase to cylinder. we get a lot of those blowers in with that problem.
Jim
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top