Wheel clamps

[Jake palmer]

Have a case 930 CK with 34” x 16” power adjust wheels. One is junk and the other is not far behind. I have some regular wheels with good tires off a 2470 I want to put on it I just need the wheel clamps to go with it since the 2470 is a smaller hub. Anyone know the part number for the regular wheel clamps?

 

[used red MN]

Have a case 930 CK with 34” x 16” power adjust wheels. One is junk and the other is not far behind. I have some regular wheels with good tires off a 2470 I want to put on it I just need the wheel clamps to go with it since the 2470 is a smaller hub. Anyone know the part number for the regular wheel clamps?

You should be able to look them up on the linked parts site. Type 930 in the search box and then chose your tractor by serial number group. The rear wheel are in Power Train starting at diagram 120 for the 34 inch wheels. You can look up 2470 parts on there as well. Click the Messicks logo, then chose CaseIH and the search box will come up again.
Messicks Case parts catalog

 

[BarnyardEngineering]

Are you sure that you just need the clamps? My experience is the entire wheel center is completely different between power adjust and normal clamp style.

 

[Jake palmer]

Are you sure that you just need the clamps? My experience is the entire wheel center is completely different between power adjust and normal clamp style.

Oh crap that's not what I wanted to hear. I was thinking since they came with both wheels as an option the hub would go either way and the clamps were just different.

 

[Jake palmer]

my power adjust versus a picture I found of a standard wheel. hub looks the same just has the clamps that are different