wheel rim width

[fixerupper]

I took some 11LX15 tires off of a running gear because the side walls are 1/8" from rubbing on the tie rod arms in front. I have some good 9.5L's to put back on. Will the 9.5 sidewalls be just as wide on the 8" rims? The running gear was under a grain wagon and is going under a flat rack and I just don't need that wide of a tire on a 16' flat rack. I have done a short search on the net for rim width charts for different size tires and haven't come up with anything for ag wagon wheels. Any ideas from you tire guys?

 

[DeltaRed]

I'm sure you will find the 9,5 is considerable narrower that the 11.I think an 8" rim is the right one for a 9.5" tire.11.2
should have a 10"(i think) rim to be 'right'.

 

[fixerupper]

Thanks, I assume it will be better with 9.5L's. Some 9.5"s look darned near as wide as an 11L.Where the sidewall on the 11s is a little tight is above the rim about three inches, maybe two inches. It's on a Westendorf gear with five hole rims so I assume it is a 6 ton. I have a hunch the original rims were 6".