wheel weights

[Abbby]

Does anyone have a picture of the special segmented wheel weight that goes where the valve stem is?

 

[showcrop]

I don't have a pic, but it is the same as the others except for an approx. 1/3 of an approx. 3 inch diameter cylinder cut out across the side opposite the mounting hole.

 

[Farmallhighcrop]

If you turn your mounting wheel.just right
you don't need one valve stem will fall
between two pies

 

[Dave G9N]

There is a picture from fordntractor of a VALVE_STEM_WEIGHT/3206 with a notch here:
https://external-content.duckduckgo.com/iu/?u=https%3A%2F%2Ffordntractor.com%2Fproducts%2Fphotos%2FFDS139C.jpg&f=1&nofb=1&ipt=2a64e79326a8cf94e6518dc5cc2c3ae9c9756a59b73398770f04e98912809ee7&ipo=images

 

[soaked]

Hi Abbby,
These are off a 62 4000. Two like this per side.

 

[Ultradog MN]

Assume you are talking about pie weights?
What tractor are you putting them on and
what size segments are they? They made the
light set @ 30 lbs/segment and the heavy
set @ 45 lbs/segment.
You might do some research on weighting
restrictions on your tractor.
The owner's manual for a 3000 gives a
maximum allowable weight you can add which
includes ballast + the weight of mounted
equipment.
I know that a full set of pie weights was
not recommended for a 600 Ford tractor
which was heavier built back there than
the 8Ns and Jubilees.
Your tractor, your call but you might at
least look into it.

 

[Dean]

Interesting.

Though I've seen two other styles of valve stem (single) segments, I've never seen that two-weight style.

 

[Abbby]

My weights are the heavier 45 lbs weights but missing two per side with one being by the valve stem. I plan to buy 4 weights from someone who has an incomplete set. If I do not get the special one for the valve stem I will need to modify it to work. Anyone have some extra ones laying around in western WI?

 

[Kirk-NJ]

Here is a couple different ones for the valve stem.

<a href=https://imgur.com/pjQheLO>

</a>

<a href=https://imgur.com/ulKMS4g>

</a>

<a href=https://imgur.com/1rxX9Bg>

</a>