White 1175 QA loader specifications

[mikefromcny]

Hi all,

I have a factory loader on my 2-65. I was wondering if anyone had a spec sheet on it. Curious to know what it's rated lift capacity is so I don't over load it. I'd even buy the manual if someone had one they wanted to part with. It's well used, but doesn't have any non factory welds. I can't find much of any info out there on it.

 

[rrlund]

I can't help you with the specs, but it'll lift most anything that the relief valve will take. The danger is going to be in pushing with it. With that FWA, the tractor is about unstoppable, so folding the loader up is what you have to be careful of. Looks like it's pretty much what a 1514 was for the Oliver 1365s.

 

[herk]

Hello Mike do you have power beyond hydraulic set up on this tractor or are you using the tractor valve set up to run the loader ?? if you do could you post a pic of the plumbing . Thanks Bryan

 

[jhwis]

Make sure all the loader mount bolts stay tight. They tend to loosen on you. Dad has the same set up. His loader is pretty beat up, but he has worked it hard for 30 plus years. Rrlund is right about pushing with it in that that is what is worst in terms of wear and tear. Lifting isn't the problem.