pcdreams

New User
I realize there are different adjustment for how wheels and such are setup on tractors but I"m trying to get an idea of max with (rear axle) an 9/2/8 N would be.

Why you might ask.. Well I got a trailer made out of an oh trailer house hauler and its about 4" between wheel wells. Got my fingers crossed it might fit :)
 
dreamer.......both the front axle and rear wheels are adjustable in 4-in increments from 48" narrow to 76" wide. Overall width, normal tread, is 64-3/4"; (normal tread is 52") Standard weight for N-Tractors is 2410-lbs. Full fuel, radiator, hydraulics, but NOT operator. You may OVERLOAD yer house trailer axle and weaksister tires........Dell
 
darn... I was fraid of that. I found a steal on a 2n too...

Got good axles on her dual axles at 3500 each but width just won't get it.

Guess I should purchase a trailer first :)

Good eye on the width as well ;) that shoulda been 4' not 4" .. hehe
 
(quoted from post at 16:11:44 07/15/08) darn... I was fraid of that. I found a steal on a 2n too...

Got good axles on her dual axles at 3500 each but width just won't get it.

Guess I should purchase a trailer first :)

Good eye on the width as well ;) that shoulda been 4' not 4" .. hehe

If you are going to buy a trailer to fit, you might want to verify that the book's (Dell) stated widths are outside to outside vs center to center. I can't help you there.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top