Wifes old clock

If the mainspring was broken you could keep winding forever and it would never stop. 👨‍🌾
Not always, the spring is under a lot of pressure and some of it can bind against the face or back of the movement. I've had that happen before and remove the movement to find the spring was broken in three pieces. It's no fun to remove a spring like that either.
 
Once you get it working, just wind it partially and get used to how tight it must be for the duration, eg. one week, eight day clock which most clocks are. I never wind my clocks all the way to the stop.
 
You might try the forum at National Watch and Clock Collectors. https://mb.nawcc.org/bot-guard/
I'll "watch" for that over there. I'm a member there as well, and check in every day or two.. There is a LOT of good advice on those boards.

It will be best to report the brand and model of the movement it they are known. It's almost guaranteed that the first comments will be to clean and oil the movement, including the spring packs.

Rust on the springs can often bind them, and once wound can actually lock them up preventing unwinding. Applications of metal cleaners can remove the rust, and allow free movement once rinsed and lubricated.
 
Grandpa kept a sewing thimble full of kerosene next to the movement in his old wind up clock.
Said something about the kerosene lubing the metal parts as it evaporated. Forty plus years that I know of and the clock never missed a beat.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top