Wisconsin model S7

John in Ne.

New User
How do you get the flywheel off one of these?I"ve tried it with a big puller and have had no luck.
Also,where can a gasket set be bought? I"ve called Napa and every mower repair shop around and can"t find one.
It"s off of an old Bolens 800,I bought it with a plow,disc,sickle mower and cult. a couple years ago and thought it would be fun to get running.Thanks,John.
 

Be careful with a puller,if your pulling on the outside of the flywheel,it'll probably break.I use a piece of aluminum to protect the end of the crankshaft,put it against the end of the crankshaft,after you take the nut off,then smack the aluminum piece with a hammer,it should pop the flywheel right off.Sometimes you have to hit it a couple times,don't be afraid to use a reasonable amount of force.These guys have Wisconsin gasket sets,http://sonnys_bolens.tripod.com/index.htm,here's a number for a Napa store in PA that has a small engine division,I know they are a Wisconsin dealer also(570)4557761.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top