work bull ?

[Tony in Mass.]

What model numbers have the handle workbull? and do any have 6 cylinders? Saw an ad that said '1956 MF workbull, 6 cylinder'. Doesn't sound like an accurate discription eh? If I went to see it, what will/might I be looking at? Thanks again, Tony

 

[Jay Mason]

Most likely either a MF202 or MF204, I beleive those are the work bull series industrials. My MF202, like most others, have a Continental Z134 4 cylinder gasoline engine. The others are equipped with either a Perkins or Standard, which are diesels. Neither of which are 6 cylinders. I do not know of any 6 bangers in the MF's but I certainly could be wrong.

Good Luck!

 

[chuck41]

Tony, MF has these models that refer to Work Bull
202,204,303,406, 1001. I cannot find literature
on the last two so I don't know. I will keep
thinking. If I find any more info I will respond.
Chuck

 

[Tony in Mass.]

Thanks guys, but I just bought an MF50 alot closer to home, so this work bull will be someone elses mystery machine! I think it is in the Fairfield county Conn Craigslist.

 

[ldtech]

(quoted from post at 15:00:02 04/16/09) Most likely either a MF202 or MF204, I beleive those are the work bull series industrials. My MF202, like most others, have a Continental Z134 4 cylinder gasoline engine. The others are equipped with either a Perkins or Standard, which are diesels. Neither of which are 6 cylinders. I do not know of any 6 bangers in the MF's but I certainly could be wrong.

Good Luck!

"ldtech"...Hello just joined the site and am looking for any info. re MF 202 workbulls, I have two, a '53 and a '63 and need a good source for carburator rebuild kits or replacements. Any ideas would help. Thanks..