Workmaster 641 - need help with identification

TraktorFan

New User
Hi all. I'm new here.
I inherited a Ford Workmaster 641 through a home purchase. A friend thought I should keep it but he does car and truck restoration. I do not. I lack a heated or covered garage/shop. And so forth.
So, I think I will sell it to someone that needs it. I got it running and drove it a bit. However what I need and what it can do are not the same. Reality is, I would love a mini excavator and skid steer. That's not happening. Probably rent what I need. And if I did get a tractor, it would have backhoe with thumb, as well as be diesel, not gas. And atleast 23-30HP model. (New Holland, Kioti or low hour Kubota).

I want to be honest, I'm not here to rebuild, etc. I'm here to find out how to identify the model year, and other advice to fix/maintain it for someone else that can use it or more.
What I know is that there is supposed to be number on sides or top of housing. I can only find the cast numbers, a series of 6 digits, and they mostly start with 301###.
If someone would help me understand the correct ID (maybe painted over?) I would greatly appreciate it.
I will change the oil (consensus is 15W40), add oil to the wet filter, it has new battery, no hour gauge (Proof Meter not on this model), temp gauge moisture in it, I put in new fuel bowl/screen since it was cheaper than correct washers, also got a carb for it, and I don't think it original paint...seems more orange than red. Picts can be posted. Thanks.
 
Look for the flat spot on the left side of the transmission bell housing as you're sitting on the tractor. It is just above and slightly toward the rear of the tractor from the starter. The flat spot faces up and there should be two large bolt holes facing out toward the side of the tractor just below the flat spot. The model number and serial number should be stamped into that flat spot. If there is a heavy coat of paint there, you may need to sand the paint down to see the numbers.

240-td3serial.jpg
 
Thanks! Looks like a 1958 model from what I can reveal of that serial. Your info helped alot! Did have to sand/scotchbrite the area and add some white crayon to see numbers. So built in Highland Park, Michigan, 134cu gas, 4 wheel adjustable axle, 4spd, built 1958 (1958-1962). Thing is, it doesn't have proofmeter but it does have PTO and 3pt hydraulic hitch.
641 sn 1958.jpeg
 
When your Workmaster was manufactured it was painted what Ford called "orange red". after nine years of the earlier series being painted vermillion.
 
Dont dismiss those tractors. Easy to work on and like to work. I had a 641 for several years that paid for itself several times over by bush hogging, boxblading, and plowing gardens.
 
631? Does it have a PTO? A 631 Ford was built without a PTO. And that would significantly limit what you can do with it. A 641 is the same tractor with a single stage clutch PTO. Usable, but with limitations.
 
631? Does it have a PTO? A 631 Ford was built without a PTO. And that would significantly limit what you can do with it. A 641 is the same tractor with a single stage clutch PTO. Usable, but with limitations.
Its a 641, or painted that way on the hood, and has a PTO. I have need more for a 4WD tractor with my terrain (hill, incline driveway, trees, no large flat areas to mow or till)
I also have a box blade that was used with it, but the previous owner failed to pitch the driveway correctly to drain, so was always dealing with box-blade and hooks tearing up the driveway to fill/grade with stones. Would have been better with a blade that tilted and pitched toward the hillside, draining down inside and not out and over.
I'm not dismissing this as its a cool tractor. Just not practical for my needs (backhoe to remove stumps, digging and grading, removing dirt, long climbs up drive without carb/fuel issues). I think someone is familiar, or restores, or just wants a reliable older gas tractor that has good tread life, hitch and PTO, could use on a small farm, field work/cutting/mowing. But not hills...
She started up after a new battery and some cleaning of points. Needs some non-ethanol gas. And I have to learn to shut off the fuel line when not running her. I will change the fluids out after this cold N'easter weekend.
Here is pict of it cleaned up..
641Workmaster58.jpg
 
You can put what ever sticker you want on the hood but that is a 631 built in June of 1958
PTO was not standard equipment on the 631 but I believe it was a option so the tractor could very well have left the factory with PTO.
At the very least it left the factory with the PTO shifter housing on back of trans so its a easy fix to add PTO later.
 
John - I think you are right. It could be a bit of a frankentractor, as it doesn’t have an XX1 series front hood emblem.
However, I’m thinking that the OP isn’t really looking for originality. He seems mostly concerned if this tractor can do the jobs that he needs done. It can, but it will take time, skill, and a few more implements. My dad ran a 100 acre cow/calf/finish hobby farm in wooded, hilly Ohio. His only machine was his Ford 641.
 
You can put what ever sticker you want on the hood but that is a 631 built in June of 1958
PTO was not standard equipment on the 631 but I believe it was a option so the tractor could very well have left the factory with PTO.
At the very least it left the factory with the PTO shifter housing on back of trans so its a easy fix to add PTO later.
You could be right! I noticed when cleaning that the hood had a decal (felt lifted) and the cleaner made the decal white run a bit. Not something enamel would do. Wonder if the previous owner thought they for a 641 from someone....
Could be a 631 with PTO and it doesn't have Proofmeter.
I do appreciate the feedback and info!
Including images of the decal upclose...raised and not paint! Along with image of the rear PTO...

John, again, probably correct on the errata that its a 631 because I looked closer this morning and the entire nomenclature on the hood is a decal!
one decal tractor.jpg
641 decal.jpg
rear PTO.jpg
 
You could be right! I noticed when cleaning that the hood had a decal (felt lifted) and the cleaner made the decal white run a bit. Not something enamel would do. Wonder if the previous owner thought they for a 641 from someone....
Could be a 631 with PTO and it doesn't have Proofmeter.
I do appreciate the feedback and info!
Including images of the decal upclose...raised and not paint! Along with image of the rear PTO...

John, again, probably correct on the errata that its a 631 because I looked closer this morning and the entire nomenclature on the hood is a decal!
View attachment 169511View attachment 169512View attachment 169513
Not too much of a mystery, here is a standard equipment/optional equipment from the owner's manual. Your's lines up well.
8X1StdOptEquip1.jpg
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top