Yanmar horn switch/button

[bmaverick]

Knowing that many of the gray YM models had/have horns, where is the switch/button for it? My YM2610 has a horn behind the grill between the headlights. It's not wired either. Fredricks just leaves them there for the new owner to decide if they need it hooked up for road use. I want it to honk at the animals to move out of the way like I do with the truck.

Some said the horn was in the steering wheel, but the new replacement wheels per the US safety requirements does not have the switch/button. Is there a dash equivalent??

I had found this, but not sure how weather proof it is ...
<LINK_TEXT text="http://www.golfcar...ed-Dash-Mounted-Horn-Button-.html</LINK_TEXT>

Here is a marine grade, but very long and bulky.
<LINK_TEXT text="http://www.marine-...tton-cap-mom-on-off-420427-1.html</LINK_TEXT>

Does Hoye have and horn switches/buttons?

 

[alan-HT]

My horn has a black button, about a half-inch diameter, on the dash but is barely audible over the engine. You could get an aftermarket car horn and install a separate switch, or a self-contained compressed-air horn and adhere or mount it where handy.

 

[winston-HT]

I mounted one similiar to this on my 2002D. It will make the cows move. My wife also. <E>:mrgreen:</E> <LINK_TEXT text="http://www.harborf...ed-sound-ooga-air-horn-96291.html</LINK_TEXT>

The auto parts stores have a variety of push button switches. If there is not already an existing hole around the dash for a button I would mound it in the metal cover plate right below the plastic dash.

 

[alan-HT]

I put that ooga horn in my truck a decade ago and it's still working fine.

 

[norfolktoad-HT]

The original horn on my Yanmar would not move my cattle, as Alan said just audible over the tractor. The switch is a black button about 1/2 inch in diameter on the bottom of the dash]