Yellow Project #1

[geok]

After finally getting the pistons out and the fact the engine was still locked up. I knew it wasn't going to be a in frame overhaul on the John Deere 301A scrap
pile. So while the front end is off, I take it apart and replace all the bushings.

 

[GermantownGreen]

Good luck there with your project. Ours in that state of disrepair too. GG

 

[geok]

Actually yellow project #1 is up and running. Was ask to show the process. Yellow project #4 301 gasser is going to be a real mess.