Your tractors.

37 chief

Well-known Member
I always look for a deal, It's usually tractors that don't run. My first tractor a TO 20 is the first tractor that ran when I got it. My free MF 203 had so much wrong I don't want to bore you with what I had to do to get it operational. My JD 5020 did run, but had a serious trans input shaft seal leak. Time for a split. My MF 231 had a rod through the block. I patched the block, new liners, different crank. I now have a good MF. My JD 401 B had a pan full of water. After new sleeves, a new main cap, and a line bore, turned crank, and reground cam It has been a good tractor also. Several Allis Chalmers Model M tractors that did run, or I couldn't have loaded them to bring them home. Dad's Model M's he left me all did run. All this over a span of 25 years or more. It would have good to start out new, but just didn't have the money back when I started disking, and mowing business. One thing, I learned a lot doing my own repairs. Still have everything except for the JD 5020.
 
Chief,
I can do all repairs on My Jubilee, Farmall C and two terramites. I bought the Jubilee and Farmall with rebuilt engines. I have rebuilt engines when I was younger. I know parts are expensive. I don't know any good machine shops to grind valves, bore out cylinders, turn crankshafts and rebuild cams. All the machine shops have gone out of business.
There isn't any repair I can't do on my gassers. Even rebuilt a dana 411.

I'm out of my league when it comes to the Kubota. That's why I bought a new one and will pay a dealer to keep it running. My face hurts after I finish mowing with the Kubota. I'm smiling too much. NO more pollen, dust and sweating inside a AC cab.

I used to buy used cars and trucks and rebuilt the engines.

No more. Too old. I plan to spend my kids inheritance and enjoy my remaining years.
 
I will keep doing my own as Im physically able. I can do just about any process except turning crankshafts, as I dont have that particular machine. My youth aged son and I are restoring my old JD4320 right now, every bolt was out of this thing all the way to bare housings. We did the Case LA last year the same way for his first FFA restoration project. I dont mind working on them when needed, but it does seem they need attention at the most inopportune time. Just yesterday the 2290 developed a fuel leak half way through plowing a field.
 
I am the same way. Buy cheap knowing it will need repair. But in the end I think it cost about the same to buy a real good one or to fix one up slowly. I have taken 2 different high hour John Deere 3020 diesels and rebulit the engines and then installed them in very low hour gas tractors. I have a 4020 that I am going to do the same thing to next winter. Some day someone is going to look at some serial numbers and scratch their heads as to what happened as I change everything over. Tom
 
I am fortunate to have machine shops that can do almost everything I need. in a town 15 miles away. San Diego 30 miles away also has good machines shops. Stan
 
Hang on to those Model M's and try to keep them running. One of the best tractors ever built for sidehill farming.
 
It finally went away. if it wasn't in the way way the time I would have kept it, for you. There isn't that much of demand for a large tractor like that around here anymore. I had a friend who wanted it, more than I did. Stan
 
The Model M was very popular out here on the west coast. Not much need for a tractor like that anymore. Dad did a lot of his farming with his M's. Stan
 
I wish I could have found a way for it to get home but i knew it would be awhile . Hopefully someone will put it to use .
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top