Lynerd

Member
Location
NE OK
My brother came across AUG 9 on US412 east of Tulsa. Saw the tire carcass 1 mile before he saw the trailer. Was 96 with a heat index of probably 106. Said he didn't blame him for keep on going as it was just less than a mile from stockyards exit but he was going 55 to 60 MPH. Lynn
cvphoto100891.jpg


cvphoto100892.jpg


cvphoto100893.jpg
 
There was a farmer near here hauling unsecured round bales on a semi tractor and trailer, a couple of them fell off and and killed another motorist. What inane picture of Barney will ridicule this tragic event ?
 

Here in Florida you would get a ticket. Not sure what for.

But you would also get a bill for damages to the roadway.
And yes, just for marks and scratches in the pavement by the rims.
 
I stopped a big rig onetime, apparently his brakes were stuck on his trailer and where on fire. I stopped him and helped him put the fire out and went on my way. I saw in the rear view mirror he pulled out right behind me. Didn't even let it cool off.
 
Interesting how in Nebraska if you ask 3 different DOT guys the same question you get 3 different answers. Ask a State trooper and you get a 4th answer.

Buddy asked his local State trooper why that is. State trooper laughed and said it is because Nebraska Dot officers could not pass to become Troopers
 
I bet he will need a couple rims also. I don't know about you but, I find it difficult to tell when a flat happens on my trailer with my tractor weight. I was going down the freeway, Someone drove by pointing at my trailer. Another time I got to my mowing job, and a tire was missing on one side. Stan
 
(quoted from post at 18:53:43 09/12/21) I still don't get this Barney thing, are you for being safe or just do what ever?

dlbuck, my take on it, and the way that I post about it is that YT replies to posts about hauling or trucks, are far, far more picky about things like load securing than real DOT inspectors are. One common one is that if anything loaded on a truck or trailer that has wheels on it that it has to be secured by chains instead of load straps, which is false. This situation is exacerbated by primarily new posters asking about how to transport, load, and secure their tractor on a trailer. They will get many incorrect answers, and the most common one is how far someone hauled a ten thousand pound tractor on a car carrier trailer behind a 1/4 ton pick-up truck with no problem. If it can be done it has to be correct right? The correct answers are easily found at FMCSA under load securement. I and a very few others here will answer these questions with the response that YT is the absolute worst place to ask these questions because those answering think they know but their information is heresay and is not from FMCSA.
 
(quoted from post at 09:18:24 09/13/21)
(quoted from post at 18:53:43 09/12/21) I still don't get this Barney thing, are you for being safe or just do what ever?

dlbuck, my take on it, and the way that I post about it is that YT replies to posts about hauling or trucks, are far, far more picky about things like load securing than real DOT inspectors are. One common one is that if anything loaded on a truck or trailer that has wheels on it that it has to be secured by chains instead of load straps, which is false. This situation is exacerbated by primarily new posters asking about how to transport, load, and secure their tractor on a trailer. They will get many incorrect answers, and the most common one is how far someone hauled a ten thousand pound tractor on a car carrier trailer behind a 1/4 ton pick-up truck with no problem. If it can be done it has to be correct right? The correct answers are easily found at FMCSA under load securement. I and a very few others here will answer these questions with the response that YT is the absolute worst place to ask these questions because those answering think they know but their information is heresay and is not from FMCSA.

That mindset applies to many other topics here as well.
 
(quoted from post at 04:18:24 09/13/21)
(quoted from post at 18:53:43 09/12/21) I still don't get this Barney thing, are you for being safe or just do what ever?

dlbuck, my take on it, and the way that I post about it is that YT replies to posts about hauling or trucks, are far, far more picky about things like load securing than real DOT inspectors are. One common one is that if anything loaded on a truck or trailer that has wheels on it that it has to be secured by chains instead of load straps, which is false. This situation is exacerbated by primarily new posters asking about how to transport, load, and secure their tractor on a trailer. They will get many incorrect answers, and the most common one is how far someone hauled a ten thousand pound tractor on a car carrier trailer behind a 1/4 ton pick-up truck with no problem. If it can be done it has to be correct right? The correct answers are easily found at FMCSA under load securement. I and a very few others here will answer these questions with the response that YT is the absolute worst place to ask these questions because those answering think they know but their information is heresay and is not from FMCSA.

The FMCSA is sufficiently vague that it is open to interpretation by both DOT officers and drivers alike. Add to that all the inconsistencies and idiosyncrasies that the individual states add on...

Go ahead, argue with the DOT officer. "Step out of the vehicle please, sir."

You don't have a choice. What they say goes even if it is 100% wrong. Sure you can take it to court but you're rolling the dice there. Time you're done with all the lawyers and lost work time just to prove your point and changing NOTHING about the broken system, you would have been better off paying Barney the $50 and being done with it. That's what most do, pay the $50 and be done with it, and spend the rest of their career jumping through hoops so Barney can't nail them for the same thing again.
 
I checked, farmers are exempt form some DOT regs.

Section 32934 Exemptions from Requirements for Covered Farm Vehicles provides exemptions from most of the Federal Motor Carrier Safety Regulations (FMCSRs) IF ALL the requirements of this section are met. It is the responsibility of the motor carrier to determine if they meet the requirements of the MAP-21 exemptions.

The Federal Motor Carrier Safety Administration (FMCSA) has previously provided guidance regarding an exception to the Federal Motor Carrier Safety Regulations (FMCSRs) for non-business related transportation of personal property, including the transportation of animals and vehicles to shows or other events.

I will ask again, how many farmers have been ticked for violating of any DOT regulations??
 
(quoted from post at 05:05:04 09/13/21)
(quoted from post at 04:18:24 09/13/21)
(quoted from post at 18:53:43 09/12/21) I still don't get this Barney thing, are you for being safe or just do what ever?

dlbuck, my take on it, and the way that I post about it is that YT replies to posts about hauling or trucks, are far, far more picky about things like load securing than real DOT inspectors are. One common one is that if anything loaded on a truck or trailer that has wheels on it that it has to be secured by chains instead of load straps, which is false. This situation is exacerbated by primarily new posters asking about how to transport, load, and secure their tractor on a trailer. They will get many incorrect answers, and the most common one is how far someone hauled a ten thousand pound tractor on a car carrier trailer behind a 1/4 ton pick-up truck with no problem. If it can be done it has to be correct right? The correct answers are easily found at FMCSA under load securement. I and a very few others here will answer these questions with the response that YT is the absolute worst place to ask these questions because those answering think they know but their information is heresay and is not from FMCSA.

The FMCSA is sufficiently vague that it is open to interpretation by both DOT officers and drivers alike. Add to that all the inconsistencies and idiosyncrasies that the individual states add on...

Go ahead, argue with the DOT officer. "Step out of the vehicle please, sir."

You don't have a choice. What they say goes even if it is 100% wrong. Sure you can take it to court but you're rolling the dice there. Time you're done with all the lawyers and lost work time just to prove your point and changing NOTHING about the broken system, you would have been better off paying Barney the $50 and being done with it. That's what most do, pay the $50 and be done with it, and spend the rest of their career jumping through hoops so Barney can't nail them for the same thing again.


Barnyard, you are correct to a slight degree. Approx. ten years ago the regs were reviewed and many nit-picking ones were changed or eliminated. Their objective in the changing as they put it, and you can read about it on the FMCSA site if you care to be informed, was to make the rules more PERFORMANCE oriented in order to give the driver more leeway to do his job to get it done safely rather than to just adhere to a book. It also enables a not so bright driver to get it wrong and be in violation, because he is not given step by step to the letter instructions.
 
I was at the golf course one afternoon. Heard a loud noise coming down the road. A one ton dually with a dump box. He had flat rear duals. He was trying to get to the county shop before the tires totally disappeared. He would have made it if he had driven a slower speed, but at 45 they weren't going to make it there.
 
Loaned my trailer to my buddy to haul his Farmall A up to his cabin for the summer. Hour north of Grand Rapids on US-131 guy motions for him to pull over. One of the tires was shredded. He changed it out for the spare and went all of two miles when the other tire on the same side blew out! Man that could have got ugly in a hurry. He opted to sit on the side of the highway until some one brought him another tire. He probably would have been able to make it to his destination but he figured that since the spare was as old as the other two tires he wasn't going to chance it. He's one of my "safer" friends. I'm sorry it happened to him, but then....?

He's since bought his own trailer, a real fancy all aluminum jobber. Funny thing -I bought this trailer from HIM about five years back. Life sure is interesting some times.

JD
 
(quoted from post at 06:29:35 09/13/21) Approx. ten years ago the regs were reviewed and many nit-picking ones were changed or eliminated. Their objective in the changing as they put it, and you can read about it on the FMCSA site if you care to be informed, was to make the rules more PERFORMANCE oriented in order to give the driver more leeway to do his job to get it done safely rather than to just adhere to a book. It also enables a not so bright driver to get it wrong and be in violation, because he is not given step by step to the letter instructions.

That's exactly what I'm talking about. Because it's not laid out step-by-step to the letter, and it's "performance" based, all a DOT officer has to do is decide that the driver's "performance" is not adequate.
 
Dad did that on a wagon one time hauled it all the way till he could not pull it anymore. Didn't notice it when he turned the last corner a mile before hand. wagon swayed off the pavement on to the gravel shoulder and he stopped right there. Had to jack it up and change 2 tires and replace a wheel. Store bought wagon gears suck. My truck frame wagons always pull the load and carry the weight with very few issues.
 
(quoted from post at 02:07:52 09/13/21) There was a farmer near here hauling unsecured round bales on a semi tractor and trailer, a couple of them fell off and and killed another motorist. What inane picture of Barney will ridicule this tragic event ?

Wow......' don't think anybody here would ridicule a tragedy so you wouldn't see a reference to Barney in a case like that.
Doesn't appear to be any one killed here, not that it couldn't result in that.
I guess you have to go back a few years to see how the Barney thing started and why most of us find it amusing.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top