Zeneth Carb Kit for Ford 800

Piney

New User
Greetings--
Can someone help me to ID the Zeneth carb on my Ford 800 ? I need to get a rebuild kit. There is supposed to be a brass tag with the model # on the carb.... but of course-- none there.

It uses rods to operate the mechanics.

The problem Im trying to solve is that he engine will run for 3-5 minutes just fine, then stop. After it sets for a minute or so, it will start up again just fine, then dia-- over and over. Holding the choke out occasionally keeps it running a bit longer-- just long enuf to get it back in the barn sometimes ! Removing the sedimant bowl lets gas pour out-- so the feed line/valve doesnt appear to be clogged.
 
Tags on carbs are on the back side so you have to remove the carb from the tractor to see the tag. Pull the drain plug from the bottom of the carb and see if you get a good steady flow of gas there. If you do then I would check spark etc. If you don't then yep you have a problem with the carb. Float maybe sticking or the needle is sticking in the seat. If its the needle some times tapping on the side of the carb will free it up and you will be good to go till it happens again. The stock carb that should be on it would be a M-S carb by the way so you have a replacement carb on it at this time
Hobby farm
 
Does the carb have a drain plug? if so check it to see if the carb has gas init when it dies.

This site sells 2 zenith carbs for the 800 series.. any chance it is one of them?

Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: 600, 700, 800 & 900 series tractors using Marvel Schebler TSX692, TSX577 or TSX551 carburetors. Replaces the following OEM part numbers: EBD9510D, 310746, EBE9510D. Center to center on the 2 mounting bolts is 2 516 inches. Made in USA, 1 year warranty. (Part No: 12566) $196.32 [Enlarge Picture]

--------------------------------------------------------------------------------


Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: 800 series, 900 series tractors 1955-1957 with 172ci gas engine. This Zenith carb replaces Marvel-Schebler TSX706 (supersedes TSX593) and Ford EAF9510G. Center to center on the 2 mounting bolts is 2 38 inches. Made in USA, 1 year warranty. (Part No: 13877) $168.13


Soundguy
YTmag Parts Section
 
OK-- ID' the carb. Ordered a rebuild kit.

QUESTION- No instructions with the kit. Looks simple enough though. Anyone have any instructions or suggestions ?
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top