zenith carb

[Vjm158]

can some please tell how to adjust this carb. I have this on my ford 800 tractor.. Thanks..vjm

 

[GlenIdaho]

vjm;

Here's some info from a previous thread. If you need further, post back or do a search of the archives using "Zenith Carburetor" as the querey.

"Just put one on my 8n. First check that your choke is open all the way. Second set the bottom of the bowl high speed mixture at about two turns out to start with(this will have to be adjusted further later under load)mine ended up at about 2 3/4 turns on my 8n. Third set the idle mixture screw at about 1 1/4 turns to startThis will have to be adjusted later). After tractor is warmed up set your idle speed first, then your idle mixture then under load mess around with high speed mixture screw until it runs the way you want. If your still running rich it could be that the float adjustment internally is incorrect."

Hope this helps.