DLPinnix78
New User
- Location
- Ronda, NC
I have my late grandfathers 4000 select-o-speed. It sat for a few years and I decided to get it running. It has the Marvel Schebler TSX-813 carburetor. After I got it running the float hung on the carb and flooded it out so I ordered a rebuild kit. I meticulously cleaned it and replaced every part. I set the idle and main jets to 1 and a half turns open. It fires right up like a champ, but if I rev it up over an idle it won't run without the choke being almost closed. I believe a vacuum leak would cause it not to idle perfectly without the choke, and I can not locate a leak. I've sprayed carb cleaner all around the carb and intake manifold and nothing changed. My next thought was to check the timing and plugs since it flooded before. It has a Pertronix ignition kit so no points to check.
And if anyone knows a Select-O-Speed expert let me know, I have a PTO issue as well.
Any suggestions would be greatly appreciated!!
And if anyone knows a Select-O-Speed expert let me know, I have a PTO issue as well.
Any suggestions would be greatly appreciated!!