(800) 853-2651
SHOP NOW

Bf Avery issues

Yesterday's Tractor Forums
grandpa Love

grandpa Love

Well-known Member
We got the old wreck back together and it runs good,on full choke......wife has been through the carb 3 times it's not blocked anywhere.....any other suggestions? New manifold gaskets. Also after 2 minutes or so of running the oil pressure gauge didn't move, opened the oil filter canister and the brand new filter is still bone dry. Google gave us directions to prime the oil pump, didn't help .... thoughts? Gauge works on another tractor
 

Attachments

  • IMG_20260912_175339973.jpg
    IMG_20260912_175339973.jpg
    2 MB · Views: 0
grandpa Love said:
We got the old wreck back together and it runs good,on full choke......wife has been through the carb 3 times it's not blocked anywhere.....any other suggestions? New manifold gaskets. Also after 2 minutes or so of running the oil pressure gauge didn't move, opened the oil filter canister and the brand new filter is still bone dry. Google gave us directions to prime the oil pump, didn't help .... thoughts? Gauge works on another tractor
Click to expand...
Sometimes a carb can be blocked so it is next to impossible to clean out and work. As for oil pressure could well be a bad oil pump or it the oil pump is driven from the distributor that can shear and cause no oil pressure
 
old said:
Sometimes a carb can be blocked so it is next to impossible to clean out and work. As for oil pressure could well be a bad oil pump or it the oil pump is driven from the distributor that can shear and cause no oil pressure
Click to expand...
We have cleaned hundreds of carbs. If it was our first I would question our ability 😔
 
grandpa Love said:
We got the old wreck back together and it runs good,on full choke......wife has been through the carb 3 times it's not blocked anywhere.....any other suggestions? New manifold gaskets. Also after 2 minutes or so of running the oil pressure gauge didn't move, opened the oil filter canister and the brand new filter is still bone dry. Google gave us directions to prime the oil pump, didn't help .... thoughts? Gauge works on another tractor
Click to expand...
Did you take the oil pump apart and see if the gears move?
Might be a sheared key or too much clearance between gears and pump housing.
Pickup tube tight with no leaks?
 
Try it with the breather tube on?
Valve adjustment is correct?
Put a vacuum gauge on it an see if its sucking?

Just spitballing ideas
 
You must log in or register to reply here.
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top