BF Avery issues UPDATE

[grandpa Love]

To bad your scrapping that core

I'm not.....I actually got it free and turning. It pumps oil . Need a gear and it's good to go. But I have ordered a good used pump,$60 shipped to me.

 

[grandpa Love]

Someone asked about the bearings and crank shaft? They are good now. Was covered in rust, had to use an air chisel to get the bearings off the crank and rods .... terrible mess. Lots of really, really aggressive sanding ( and some Dremel work) everything is shiny and smooth. All back together . Unfortunately,there are folks here who will believe this fictional tale . . Can't wait for the crazy replies

 

[560Dennis]

I'm not.....I actually got it free and turning. It pumps oil . Need a gear and it's good to go. But I have ordered a good used pump,$60 shipped to me.

Suggest accounting for what I see was someone’s dragging it to free the lock up. Highly recommended looking at the cam gear for fractures teeth. Just what I see in photo ,
I use ag lime and kerosene to detect cracks old method, or crack detectors commercial available.
I’m only suggesting this is I don’t want to hear one of the cam teeth crunching the oils pump and locking it back up after all your wasted hard work .

 

[used red MN]

Someone asked about the bearings and crank shaft? They are good now. Was covered in rust, had to use an air chisel to get the bearings off the crank and rods .... terrible mess. Lots of really, really aggressive sanding ( and some Dremel work) everything is shiny and smooth. All back together . Unfortunately,there are folks here who will believe this fictional tale . . Can't wait for the crazy replies

The question is posed about the bearings because you ran it with no oil pressure. Hopefully you used a good and abundant amount of assembly lube. FYI, keep the fictional replies for your pals on FB. I’m not sawing the legs off of every FB user, I’m sure there are intelligent folks on there posting good content. But some ya-hoo showing an engine supposedly in an IH1256 with a chrome turbo with an air pipe coming off of it the size of your thumb and a 5 cylinder injection with brake line couplers in the injector lines, that the type of stuff I have no time for. Fake FB stuff

 

[grandpa Love]

The question is posed about the bearings because you ran it with no oil pressure. Hopefully you used a good and abundant amount of assembly lube. FYI, keep the fictional replies for your pals on FB. I’m not sawing the legs off of every FB user, I’m sure there are intelligent folks on there posting good content. But some ya-hoo showing an engine supposedly in an IH1256 with a chrome turbo with an air pipe coming off of it the size of your thumb and a 5 cylinder injection with brake line couplers in the injector lines, that the type of stuff I have no time for. Fake FB stuff

Geeze, lighten up. . This group is pretty rough on folks joking around.

 

[cjunrau]

Geeze, lighten up. . This group is pretty rough on folks joking around.

that is because we can not tell if you are joking. Some of us have seen some real idiots do some crazy stuff that unless we know the person we assume he is always telling the truth and serios on the internet. I know from past posts that you have your tongue in cheek regularly. still makes one wonder what the truth is sometime. I know for the most part you and engines are way smarter than me so if you ask a question I just read it for fun. I always put lol behind if I am not serios just to avoid all the ruffled feathers.....LOL

 

[grandpa Love]

that is because we can not tell if you are joking. Some of us have seen some real idiots do some crazy stuff that unless we know the person we assume he is always telling the truth and serios on the internet. I know from past posts that you have your tongue in cheek regularly. still makes one wonder what the truth is sometime. I know for the most part you and engines are way smarter than me so if you ask a question I just read it for fun. I always put lol behind if I am not serios just to avoid all the ruffled feathers.....LOL

But I literally said I was joking about the bearings and crank

 

[cjunrau]

But I literally said I was joking about the bearings and crank

some people read faster than their brain receives, LOL
I know I skim over to often and miss some valid equations. Maybe that is why I did not do that good in school,LOL

 

[Richard G.]

some people read faster than their brain receives, LOL
I know I skim over to often and miss some valid equations. Maybe that is why I did not do that good in school,LOL

That is why I reread before jumping to conclusions.