I went and looked at a 1962 Farmall 504 gas today. The deceased owners grandson in law said that the neighbor had gotten it running, but he had never heard it run. They are in town (Tennessee) from Washington state to handle some affairs. He mentioned that the neighbor told him the tractor has a transmission issue and it’s probably hydraulic related. I don’t know a lot about 504s, but I do know they have a dry clutch and a gear transmission. We went ahead and tried to start the tractor and it started pretty easy once we jumped it off. Battery is shot, carburetor leaks, and needs a rebuild, fuel settlement bowl leaks badly, and none of the gauges work, so I’m not sure if it’s charging or whatever. The gas engine runs excellent with no smoke, no hiccups, and is strong the hydraulic lift and power steering work perfectly with no odd noises clutch pedal feels good but when you go to takeoff in any gear even first, it doesn’t want to move, but you can fill it trying to. If you open the throttle up wide open, it starts moving slowly and does so even if you change to a higher gear, it will barely increase in speed and move slow slowly. If you pull the TA lever back or Forward it has very little change in speed and pulls about the same… And it may have no change as the slight pause may make it feel like it does.
I’m not sure what to offer them, but the guy wants $3000 for the tractor, 6 foot generic box blade, and a 6 foot old but solid rotary cutter….all 3 point hitch. In my opinion, the tractor by itself in good mechanical shape is worth $2,500 Maybe $3,000. I just don’t see a lot of demand for a narrow front 504 gas. I would be buying to fix up and sell because I just hate for it not to get a new life for someone and it not be under my watch. Sheetmetal is very straight and all there except for lower dash panel and rear sides. Fenders are slightly bent. Original seat is surprisingly in decent shape. It has rear weights and 2 front frame weights.
What could Be the issue? The dry clutch, MCV, or TA ?? Or a combination of all? What would it cost to fix if a TA or MCV ? I’m aware the TA could be deleted also. I’ve done clutches but have not been around the others. Not really looking for a long term project to add to the list but Inwish I could save it if it makes financial sense to make a little money.
I’m not sure what to offer them, but the guy wants $3000 for the tractor, 6 foot generic box blade, and a 6 foot old but solid rotary cutter….all 3 point hitch. In my opinion, the tractor by itself in good mechanical shape is worth $2,500 Maybe $3,000. I just don’t see a lot of demand for a narrow front 504 gas. I would be buying to fix up and sell because I just hate for it not to get a new life for someone and it not be under my watch. Sheetmetal is very straight and all there except for lower dash panel and rear sides. Fenders are slightly bent. Original seat is surprisingly in decent shape. It has rear weights and 2 front frame weights.
What could Be the issue? The dry clutch, MCV, or TA ?? Or a combination of all? What would it cost to fix if a TA or MCV ? I’m aware the TA could be deleted also. I’ve done clutches but have not been around the others. Not really looking for a long term project to add to the list but Inwish I could save it if it makes financial sense to make a little money.