37chief
Well-known Member
- Location
- California
Can I put mig welder mix in a CO2 bottle? Thanks, Stan
It isn't any of my business so I'm not going to ask why you don't simply exchange for proper bottle. I agree with JimMe.Can I put mig welder mix in a CO2 bottle? Thanks, Stan
I did that for a long time. CO2 welds actually penetrate better but do create some spatterYou can mig weld with CO2 it's just not as clean.
The local school would do that to save money.
Just saving time driving to a welding supply store, to see what I should do with the extra CO2 tank I picked up a few years ago, and have it filled for a spare. StanIt isn't any of my business so I'm not going to ask why you don't simply exchange for proper bottle. I agree with JimMe.
It isn't any of my business so I'm not going to ask why you don't simply exchange for proper bottle. I agree with JimMe.
The bottom line is to take your bottle to the store and ask them.Can I put mig welder mix in a CO2 bottle? Thanks, Stan
The valves on Co2 and 75/25 are totally different. A Co 2 bottle has male threads and requires a gasket between it and the regulator. It is filled to 500 PSI and is a liquid. A 75/25 cylinder has a larger female thread and is pumped to 2250 PSI. I have used straight Co2 for my Mig welding for over 40 years. Costs less than half of 75/25. I really don't know you are trying to accomplish.Can I put mig welder mix in a CO2 bottle? Thanks, Stan
A question I don't think got asked is what size cylinder is this? Around here the largest exchange cylinders are about 80 cu ft.Can I put mig welder mix in a CO2 bottle? Thanks, Stan
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy