Question for welders

It isn't any of my business so I'm not going to ask why you don't simply exchange for proper bottle. I agree with JimMe.
Just saving time driving to a welding supply store, to see what I should do with the extra CO2 tank I picked up a few years ago, and have it filled for a spare. Stan
It isn't any of my business so I'm not going to ask why you don't simply exchange for proper bottle. I agree with JimMe.

thought smoe one may know. Stan
 
If its a beverage type CO2 bottle, it likely has a different valve on it. I've got a couple of 60 cu. ft. cylinders that are very similar to beverage cylinders. I use them for straight AR and 90/10 mix, but they will fill them with whatever shielding gas I ask for.
 
Can I put mig welder mix in a CO2 bottle? Thanks, Stan
The valves on Co2 and 75/25 are totally different. A Co 2 bottle has male threads and requires a gasket between it and the regulator. It is filled to 500 PSI and is a liquid. A 75/25 cylinder has a larger female thread and is pumped to 2250 PSI. I have used straight Co2 for my Mig welding for over 40 years. Costs less than half of 75/25. I really don't know you are trying to accomplish.
 
At the welding store I use it's an exchange and you can get a high pressure cylinder with a different gas that you brought back. They do like to stick small time welders with expiring hydro test date cylinders, this is "owned" sizes.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top