Stripped Lug Nut

I had one like that last year, I took a grinder and split it almost to the threads, then cracked it with a small chisel.
My question to all that say to split nut with a grinder, how do you get a grinding wheel on a lug nut to slice it without grinding into the wheel itself? I have had a lot of luck using a socket that, if you look at it from the end is lined with little pins. As you push socket on, the pins retract and the ones that don't grip the odd shaped nut. I was skeptical at first because I think it is one of those TV ad type tools, but it really does work. JM2C
 
That handy oscillating multitool could probably get into that tight spot to split it. If not cut a couple of notches to catch it with a chisel and walk it loose. I’m sure you have been soaking it with penetrating oil.
 
Found this at O’Reilly. Did the job. Was skeptical but gave it a shot.
 

Attachments

  • IMG_0141.jpeg
    IMG_0141.jpeg
    1.4 MB · Views: 0
I am glad it worked for you, that is much better than some of the other options offered. Personally, I would have gone for the twist socket type as I think they will grip better, they will grip on a severely rounded rusted away nut (I have even removed a stud with one), can be use with an impact, and will take more use and abuse. I thought these might be a less expensive version twist socket but found they are not.

Titan extractor 1.png

Below is a link to a you tube video review of the Titan extractors.

TITAN damaged bolt extractor review
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top