injection pump

[david mclean]

where can i find parts for a american bosch psb6a-70v-s4550a1 need roller,plunger and pin?

 

[jordan hackman]

good luck. those parts haven't been made for years and are practically inpossible to come by. i'm pretty sure that anyone who owns those pumps hang on to them.

 

[Anonymous-0]

I am a little confused here. The plunger is matched to the hydraulic head itself. When I worked on them 30+ years ago we stocked the tapped, roller and pin as an assembly. First question is your plunger broke? Also remember those parts (tappet) are the same for any Oliver PSB pump. Prices I here for an exchange hydraulic head are in the 8 to 900 dollar range if you can find one. By the way an exchange hydraulic head was a little less than 100 dollars then.

 

[Anonymous-0]

I have a new one in stock. The part number is K-5747A. The plunger come with pin. Svehlak Tractor call at 512-633-5014

 

[Beneford406]

I have a new one in stock. The part number is K-5747A. The plunger come with pin. Svehlak Tractor call at 512-633-5014

Still have parts for these pumps?

 

[Jim.ME]

Still have parts for these pumps?

You would be best served to start a thread of your own, rather than try to contact an unknown person(s) in a 12 year old thread. This site changed software at the end of 2023. Anonymous-0 was username that appears on many posts, in place of the actual username, due to that change. I understood it was mainly due to the actual users being inactive and not having current contact info on record that the software needed to keep identities. Anonymous-0 could show as the username for several people in the same thread because of this.

I web search shows Svehlak Tractor is on Facebook, you might try contacting them with the phone number shown or through their Facebook page.