Recent content by AndrewJ

  1. A

    560 cockshutt sleeve protrusion

    Does anyone know if there was ever a bulliten on sleeve protrusion for the 4-270 perkins. Having head gasket sealing issues ...bubbles in the rad.
  2. A

    560 Cockshutt sleeve protrusion

    Getting bubbles in the rad.. tried a new head gasket and psi tested head still bubbles. So was there a bulliten anyone knows of that talks of the sleeve protrusion above the block in the 4-270 Perkins?
  3. A

    504 MM water in engine oil

    Just bought a G705 MM that’s getting water in the engine oil.. is it possible if the water pump seal goes this could happen? Is there a weep hole in the pump it’s supposed to leak out first?
  4. A

    American Bosch psb pump

    I could give them a call too..
  5. A

    American Bosch psb pump

    Thankyou I ll give them a call tommorrow.. !
  6. A

    American Bosch psb pump

    Just curious if there s any injection shops out the that can still test a psb pump? So far up here in Saskatchewan Canada I haven t one one anywhere near me that can.
  7. A

    560 Cockshutt head gasket

    I need both! I ll give them a call Monday .. what part number did they show for the head gasket and valve cover ?
  8. A

    560 Cockshutt head gasket

    Does anyone know a source for a head gasket and upper head gasket set for a 1961 560 Cockshutt.. I can t read the engine tag but I think it s a 4-270 Perkins in it??
  9. A

    570super to 570 Cockshutt injection pump swap

    I d be curious to know if you have time to check that out some time. I was thinking with the 570 super being a larger displacement it would require more fuel somehow so something would be different.
  10. A

    570super to 570 Cockshutt injection pump swap

    The lines fit they are the same.. so would the 570 super just use larger injector tips?
  11. A

    570super to 570 Cockshutt injection pump swap

    Yes Psb6a pumps.. the tag on the governor housing is the same on both but the tag in the hydraulic head is missing off of the one so didn t know for sure if they are the same.. different displacement engines so I wasn t sure if the pumps could be swapped.
  12. A

    570super to 570 Cockshutt injection pump swap

    Is the injection pump from a 570 super Cockshutt the same as a standard 570?
  13. A

    Psb6a injection pump 570 cockshutt

    Well I tried 28 .. no luck .. still puking fuel And missing so took injectors to a "better" injection shop.. turns out one was stuck and the other five have the wrong tips in them.. wrong spray angle . They were supposed to be redone live and learn the hard way I guess.. thanks for the advice
  14. A

    DD298x Hercules rocker arms

    So I have a dd298 Hercules in a 570 Cockshutt .. noticing when assembling it the oil holes in the rocker arms never line up with the holes drilled in the rocker shaft.. the bushings aren t groves to make them ever line up either .. and upon running it I don t seem to be getting oil past the...
  15. A

    Psb6a injection pump 570 cockshutt

    I checked timing last night initially it was out .. 32 degrees .. hardly started .. lots of knock . Reset to 26 .. starts good now idles .. but go to speed up and it breaks apart and misses I might pull the head off the pump
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top