(800) 853-2651
SHOP NOW

Recent content by BAP

Yesterday's Tractor Forums
  1. B

    IM400 Mower parts

    I stock quite a few parts for the IM400 mowers, what parts are you needing? Thank you, Brian - Brooks AG Parts
  2. B

    Rotary Mower Blades

    It sounds like you have model BB70 blade bolts which measure 3-1/2" overall height with a 1/2" shoulder for the blade, what you probable had was the BB55 version of the bolt which would measure 3" with the same 1/2" blade shoulder. Both bolts have a 1-1/8" threads and a key manufactured into the...
  3. mikewood869

    Ford 501 sickle mower

    Does anyone know what the dimension are on the wooden shaft on a Ford 501 sickle mower is mine broke some years back? The serial number of the mower is 78956. Also could I get away just using the pitman arms instead of having the spring and the lever in the wooden shaft? The mower is stored...
  4. B

    PTO shaft slides off

    If you need a rebuild kit for the quick disconnect we have them available! Our code 26-021 Thank you Brooks AG Parts New Richmond, OH
  5. B

    King Kutter Bush Hog

    Stand the cutter up on it's nose or side so you have full access to the bottom of the deck. Loosen the castle nut but do not remove it. Cut four hardwood wedges and drive them between the bottom of the deck and top of the stump jumper to put some pressure on the stump jumper. Do not drive them...
  6. B

    Woods mower

    Dave, Omni gearboxes come in various sizes and ratings. They have been used by Alamo, Bush Hog, Landpride, Woods, Rhino and many other companies, they are a major provider of mower gearboxes. Your biggest problem will be mounting the gearbox and the blade carrier. Omni doesn't offer a side...
  7. B

    Rotary mower tire

    The metal band is common now, I have been seeing them for some time, the good wheels have stainless bands and hardware, the cheap units have steel bands. What is important is how tight the sections of rubber are the tighter they are the less water gets between the sections. A good wheel will...
  8. B

    Speed-up gearbox

    Sounds like just a simple rotary cutter right angle gearbox would work, get the blade hub with the box and you can weld the pulley to the hub for easy mounting, hp rating might be a little higher than you are looking for at 40hp but at $170 delivered price it is pretty reasonable. If you pm me I...
  9. B

    Speed-up gearbox

    Looks like you will need either a 1:1.47 ratio box to give you 793rpm output at 540 rpm input speed or a 1:1.93 ration to give you a 1042 output at 540rpm input. What shaft configuration and mounting are you looking for? Brooks AG Parts
  10. B

    Rotary mower

    Blades should be readily available for the BMB mowers, gearbox and parts are also probable available should they ever be needed but are pricey!
  11. B

    Harrow bushings?

    John, Which bushing has broken, is it the bushing between the blades or the one in the bearings? Can you describe it better? Does it have ribs on it?
  12. B

    AGMO USA Z-45-312 brush hog

    Sounds like you have an older mower with a Howse AGMO gearbox. This box is no longer in production and Howse recommends you cut off the two vertical plates that the gearbox is sandwiched into and mount a replacement 40hp gearbox directly to the deck by drilling mounting holes for the new box. In...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top