Recent content by Braxtyn_johnson$

  1. Braxtyn_johnson$

    Oliver 77 problems and questions

    Do you have a picture of it?
  2. Braxtyn_johnson$

    Oliver 77 problems and questions

    I figured out my governor problem, there was a broken piece, now i just gave to find where i can get this piece at.
  3. Braxtyn_johnson$

    Oliver 77 problems and questions

    Okay, I just thought somthing with the straight pipe, since it made a difference when I put a new one on the AC since it was basically straight piped with how rotted out the muffler was
  4. Braxtyn_johnson$

    Oliver 77 problems and questions

    I also forgot to mention the tractor does have a straight pipe on it, i don't know if that has anything to do with the sputtering but I just thought because I had an allis chalmers C a while back and the old muffler was rotted out, I put a new one on and it ran mutch better.
  5. Braxtyn_johnson$

    Oliver 77 drawbar

    I dont have any pictures at the moment, but since the draw bar is cast iron it may be difficult to weld
  6. Braxtyn_johnson$

    Oliver 77 drawbar

    The parts I have circled are what's cracked
  7. Braxtyn_johnson$

    Oliver 77 drawbar

    I'm pulling stock at i believe about 4500 lbs
  8. Braxtyn_johnson$

    Oliver 77 problems and questions

    I've got my 1951 oliver 77 to finally run good, but there is still some problems and I'm looking for solutions. 1. After running the tractor for a while at higher RPMs it'll start sputtering and almost dies, keep in mind this is while driving it/under load, but when i let it idle for a minute...
  9. Braxtyn_johnson$

    Oliver 77 drawbar

    I'm gonna be pulling my 51 oliver 77 this year, but before I do that I have to figure out my hitch ordeal, the bracket that holds the main drawbar on is cracked, so i was wondering, is there a way u could completely get rid of the whole hitch set up and replace it with a custom one? If there is...
  10. Braxtyn_johnson$

    Oliver 77 gas governor Questions

    I got a 1951 oliver 77, got it running like brand new, but, there's one problem, when i put the throttle to the 4th notch it revs way up to lets say 1500 rpm, but if I put it to the 3rd it's basically idle, it's like the throttle is really sticky, im thinking somethings up with the governor...
  11. Braxtyn_johnson$

    oliver 77 road speed

    To be honest, I don't know, I've got a stock 77 with nothing but a straight pipe, and that thing easily pushes 15
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top