(800) 853-2651
SHOP NOW

Recent content by bvaughn85

Yesterday's Tractor Forums
  1. B

    F20 problems

    Yes. Timing is correct. Mag sparks as soon as piston is heading down after compression stroke.
  2. B

    F20 problems

    Have been working on getting an f20 running that has been sitting for 15 years. Started off with the basics. Clean fuel tank and sediment bowl, new fuel. Rebuilt carb( have done many for h and m but first for f20). Soaked and cleaned all passages. Float set around 1 7/8”. Spark looked weak so we...
  3. B

    Rough running MTA

    Been working on an engine problem for awhile and looking for some other ideas. Engine started running rough while plowing with it. Thought it was possible carb issue. Rebuilt the carb and still same issue. Good fuel flow coming from tank. Gas is fairly fresh. Also tried a good working carb off...
  4. B

    H 9 speed again

    can someone give me some input on how the 9 speed actually works. I understand that it speeds up the bottom shaft to allow higher speeds in between 4th and 5th. Just can’t really wrap my head around how it does that. I’m looking at the bottom shaft while the cable is being moved but don’t see...
  5. B

    9 speed for H

    I tried that option and he didn’t want to entertain it.
  6. B

    9 speed for H

    It’s the cable style. We will pretty much be taking the 9 speed components out of the rear end of donor tractor and putting in customers tractor.
  7. B

    9 speed for H

    Does anyone have any literature on installing a 9 speed in a farmall H? We have a doner rear end with one already installed, but the owner wants to keep the original tractor together. Does anyone have any tips that have done this?
  8. B

    450 antifreeze in oil

    Sorry. Between Sleeve and piston
  9. B

    450 antifreeze in oil

    The leak is between the sleeve and cylinder. I could see antifreeze running down sleeve
  10. B

    450 antifreeze in oil

    Recently started working on a 450 that was getting antifreeze in the oil. Removed oil pan and valve cover to get a better visual. Started off by pressurizing the cooling system to 4 psi. Within a few minutes a steady drip was occurring inside the sleeve of the number 1 piston. Was pretty sure my...
  11. B

    Pressurizing oil system

    Recently installed rear main seal on H and still having problems with it leaking. I am wanting to pressurize the oil system somehow to be able to see where the leak is coming from without having the engine running. Can anyone explain the best way about going about this? Ill have the tractor...
  12. B

    Super MTA Diesel PTO

    I have a Super MTA diesel. I put a different pto unit on the tractor. Old one had several bearings worn. Too much play in the shaft. I put different unit in, adjusted bands according to the manual and filled it with oil. I checked to make sure it worked and nothing happened. I checked seasonal...
  13. B

    Super MD TA Carb

    I would agree with you. Our big question is how is that done. There are no adjusting needles or anything on this carb.
  14. B

    F8 carb

    Hi everyone. Been working on a Gas start Diesel engine and recently rebuilt the carb. Tractor would run on gas side before rebuild but had to be on full choke. After rebuild, tractor will not idle up and is smoking black pretty heavily. Runs at a very low rpm. Took carb back off to check...
  15. B

    Super MD TA Carb

    There is no adjusting needles on these f8 carbs. Everything is fixed. Just mainly trying to figure out why it wont idle up. From what Im gathering. These carbs tend to run a little rich right out of the gate. Choke and air breather are all opened up. If we pull choke it will pretty much die...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top