Recent content by C. Burnett

  1. C

    IH Loadstar 1600

    I"m looking at this truck and it supposedly only has 22000 miles on it. It is a "72 model and I was wondering if they were pretty good trucks? I see them a lot but it seems they are always sitting in one spot and no one seems to keep them as grain trucks very long. It might be because of hauling...
  2. C

    MF 180 shifting

    I use to run a 180 some 30 plus years ago and I don't recall having to shift down to low multipower to be able to change gears but it has been a few years. I was under the impression for the health of the multipower that it be left in high until needed.
  3. C

    MF 180 shifting

    MF 180 doesn"t want to shift between gears when it is in High range multipower. Why?
  4. C

    Where were they made?

    Thsnks, gentlemen. I looked on some of the better known sites for farm equip. listings and did not find many of the examples that you( DavidP) mentioned so they must be popular.
  5. C

    Where were they made?

    I am looking at some MF tractors in the 60 to 80 horsepower range and I think I want something manufactured in Canada or the UK due to what I've read. Is this correct or not and can anybody tell me where to find out exactly where they were made? I've been looking at the 175 up to the 283, 285...
  6. C

    IH 656 Hydro

    I'm going to look at a 656 Hydro and don't really know what to check with the Hydro. What should I look for? Will the used Hydro dollar me to death? Are they prohibitive to get repaired? Thanks
  7. C

    What size tillage implements will a 1655 handle?

    We have some of the tougher red clay soils around our area and we would use the 3 16's and a 10ft disc. Should handle with ease except in the driest of times.
  8. C

    1100 Massey shifting

    I'm going to look at a 1100 MF tractor that the owner says he has owned for the past 25 years and it has always had a little bit of grinding, for lack of a better term, when he shifts from one gear to another. I used to run a 1100 about 35 years ago but I can't remember how it shifted. I want to...
  9. C

    The Hydra power trans, good or bad?

    I gave the owner a call. It is the Perkins engine and it already had been converted when he got it. It has a Bushog loader with hay fork but no bucket.
  10. C

    The Hydra power trans, good or bad?

    I had read where these tractors did not come with the Perkins engine but this ad specifies that it is the Perkins. I don't know whether a change has been made or he means an 1850. Is there a problem if it has been changed? I gather that the hydra power is the equivalent of IH's TA or MF's...
  11. C

    The Hydra power trans, good or bad?

    I'm looking at an 1855 with the Perkins engine, Hydra power trans, and loader. Since I've had no dealings with Oliver, what should I know?
  12. C

    180 MF can't change gears in low Multipower

    Looking to buy a 180 that won"t change gears in low Multipower. What might be wrong and what all will need to be repaired? I know repairs are expensive for just about anything but if this is happening I"d like to get the mechanic to check everything if he goes in there. I"ve heard that more than...
  13. C

    MF 165 lift problem

    A co-worker has bought a 165 with an industrial loader on it. He says the 3pt will only lift his bush hog about 8 to 10 inches off of the ground. He has changed the filters. Is it time to look towards the pump or is there something else to check first?
  14. C

    plowing with a 165

    Ric, I was wondering if this was your first experience with plowing? If so there is more to it than just hooking up the plow and taking off. Your tractor will love you for learning to set the plow properly.
  15. C

    IH 856

    I need opinions on the good or the bad of the 856. I would also like to know what to check for when I go to look at one for sale. Thanks
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top